Owner`s manual

15
Live Monitor Setup with BVE02-PV
The monitoring for live Studio Gallery operation employs the same monitor matrix setup
described at the beginning of this Monitoring section as it ensures accurate metering of the
To-air signals and allows the most appropriate configuration of the loudspeaker monitoring
for the studio or programme – regardless of the capability or facilities of the mixer.
Live Studio Gallery Monitor Operation
Program Monitor
During Program Monitor the outputs of the mixer are simultaneously fed to both the To Air
transmission path and the external monitoring and metering system via the mixer Omni
outputs. The monitor path receives exactly the same signal as is fed To Air by the mixer and so
provides an accurate and reliable monitoring reference.
Audio Preview Monitor
In Audio Preview monitor the mixer outputs associated with a camera, VTR, server or outside
source selected to the Preset bus of the Vision Switcher are routed to the last 2, 4 or 8
channels of the mixer. These channels are set to transparently pass the signal through to the
post-fader insert sends which, when Audio Preview is activated, are routed via the Output
Matrix to the Omni outputs.
The level of the faders of these last mixer channels may be adjusted, while hearing and
metering the audio, to give the level appropriate for the programme and overall mix.
The resulting fader level is stored by the BVE02 and applied to the corresponding input faders
whenever that source is opened to the Program bus.