User Manual

Digital Security Controls Ltd. 6 Private and Confidential

Installation Manual DATE : 09/30/97 DRAFT

• Microcontroller for annunciation control and interface to the WLS9000.

This siren may be used for:

• High Volume Siren via Piezo (for Alarm Annunciation)

• Entry/Exit Delay Beeps (like the WLS-903)

• Central Station Talk/Listen (via mic and speaker)

• All Audio Annunciation.

There are four terminals used for the Remote Siren. They are:

• Vcc (Red)

• Ground (Black)

• Audio Carrier (Yellow)

• Data Line (Green)

4.1.11 Microphone for Central Station Talk/Listen

A microphone on the WLS9000 is used in conjunction with the on-board speaker for

Central Station Talk/Listen.

4.1 Terminal/Jack Connections

The WLS9000 has the following terminal connections:

• Four terminals for the Remote Sounder = This interface will use a four wire connection.

• Two terminals for AC Power – A 9V (@ 20VA) transformer is used as the source of AC at these terminals.

• Double Battery Leads for wiring the batteries in parallel.

• Two terminals for two Hardwired (EOL) Zone Loops. The common is shared with the Remote Sounder Interface.

• PC-LINK Header for Local Downloading

Four Terminals for the Telco Interface (Tip/Ring/T1/R1)

4.4 Miscellaneous

The WLS9000 is shipped with a removable overlay to assist the installer through the installation

process. This overlay outlines the following aspects of WLS9000 Programming and Installation:

• The Wizard’s “Yes” and “No” Programming Methodology.

• Function Key 1-6’s Hexadecimal Capabilities.

• Function Key 7’s “Backward” Function.

• Function Key 8’s “Forward” Function.

• Accessing the configuration wizard.

• Hardwired Zone Configuration.

4.3 Plastics

The WLS9000 requires all new plastics. The complete WLS9000 project comprises of the following plastics parts:

• Front Housing (08-843)

• Rear Housing w/Made in Canada (08-844)

• Rear Housing without Made in Canada – used Internationally where required (08-845)

• Wall Mount Backplate (08-846)

• Front Bezel (08-847)

• Front Bezel Sound Deflector (08-1056)

• LED Pipe (08-848)

• Rear Housing w/Made in Canada for Deskmount (08-926)

• Rear Housing without Made in Canada for Deskmount (08-927)

• Deskmount Interface Plate (08-1057)