User Manual

Digital Security Controls Ltd. 40 Private and Confidential
Installation Manual DATE : 09/30/97 DRAFT
07 [*][6][----][4] System Test
This key will perform the System test when pressed. It is the equivalent of entering
[*][6][Master Code][4]. This key only works while the system is disarmed.
08 [*][1] Bypass Mode
Pressing this key will put the keypad in the Zone Bypass mode. It is the equivalent of pressing
[*][1] while disarmed. If an access code is required for bypassing (Section [016], Option 5), the
user must enter the access code before entry will be permitted. This key only works while the
system is disarmed.
09 [*][2] Trouble Display
Pressing this key will put the keypad into the Trouble display. It is the equivalent of pressing
[*][2]. This key will work while the system is armed or disarmed.
10 [*][3] Alarm Memory
Pressing this key will put the keypad into the Alarm Memory display. It is the equivalent of
pressing [*][3]. This key only works while the system is disarmed.
11 [*][5] User Programming
Pressing this key is the equivalent of entering [*][5]. An access code will be required before
entry to this section is allowed to the User Programming menu. This key only works while the
system is disarmed.
12 [*][6] User Functions
Pressing this key is the equivalent of entering [*][6]. An access code will be required before
entry to this section is allowed to the User Functions menu. This key only works while the
system is disarmed.
13-15 Not Used (Reserved)
16 [*][0] Quick Exit
Pressing this button will perform the Quick Exit function (if enabled). It is the equivalent of
pressing [*][0] while armed. This key only works while the system is armed.
The Quick Exit feature must be enabled (Section [015], Option 3).
17 [*][1] Activate Stay/Away Zones
Pressing this key will remove the automatic bypass on all Stay/Away zones on the system.
It is the equivalent of pressing [*][1] while armed. This key only works while the system is armed.
18-26 Not Used (Reserved)
27 Status (Query)
Pressing this key will result in the WLS9000 annunciating its current status. The user can then
proceed to do other functions by pressing the corresponding keys on the WLS9000, or wait for the
WLS9000’s audio prompting to time out.
28 Volume Control
When this function key is pressed for two seconds, the WLS9000 will increment through the four
different volume levels from lowest to highest, cycling back to the lowest after the highest volume is
reached.
29 Memo Record
When pressed, this function key will initiate recording (via the local microphone) of a message.
Recording begins after the three acknowledgement tones are annunciated.
30 Memo Playback