User's Manual
Table Of Contents
- Table of Contents
- WARNING: Installer please read carefully
- General
- Model Information
- Panel Mounting
- Features
- Technical Specifications
- Ratings Compatibility
- Pre Installation Configuration
- Communicator Installation Configuration
- Installing Communicator in Panel
- Communicator Placement Test
- Initial Panel Programming
- SMS Command and Control
- Communicator Status LEDs
- Yellow Trouble LED
- Panel Supervision Trouble (2 Flashes)
- SIM Lock Trouble (4 Flashes)
- Cellular Trouble (5 Flashes)
- Ethernet Trouble (6 Flashes)
- Receiver Not Available (7 Flashes)
- Receiver Supervision Trouble (8 Flashes)
- FTC Trouble (9 Flashes)
- Module Configuration Trouble (12 Flashes)
- Red Network Connection Status LED
- (Green LED 1) (Green LED 2) and (Yellow LED) Signal Strength
- Network Activity LEDs - Red and Green(TL2803G(R)E / TL280LE(R) only)
- Communicator Troubleshooting
- Ethernet/Cellular Programming Options
- System Options
- Programming Options
- Communications Reporting Codes
- System Test Options
- Ethernet Receiver 1 Options
- Ethernet Receiver 2 Options
- Ethernet Options
- Cellular Receiver 1 Options
- Cellular Receiver 2 Options
- Cellular Options
- SMS Event Notification/Command and Control Options
- External Event Label Programming
- Receiver Diagnostic Testing
- System Information (Read Only)
- System Reset Defaults
- Ethernet Cellular Programming Worksheets
- System Options
- Programming Options
- System Test Options
- Ethernet Receiver 1 Options
- Ethernet Receiver 2 Options
- Ethernet Options
- Cellular Receiver 1 Options
- Cellular Receiver 2 Options
- Cellular Options
- Command and Control Options
- External Event Label Programming
- Receiver Diagnostic Testing
- System Information (Read Only)
- System Reset Defaults
- Limited Warranty
- EULA
- Regulatory Information
[964] Voice Volume
Default (04)
Valid entries from, 00 to FF.
[965] Microphone Gain
Default (01)
Valid entries from, 00 to FF.
[966] SMS Recovery Hour
Default (0018) Valid range: 0000 - FFFF.
[967] SMS Threshold 1
Default (0032) Valid range: 0000 - FFFF.
[968] SMS Threshold 2
Default (0064) Valid range: 0000 - FFFF.
[969] Debug Mask Timeout
Default (2760) Valid range: 0000 - FFFF.
[970] Monitoring Heartbeat Interval
Default (0060) Valid range: 0000 - FFFF.
System Information (Read Only)
[971] EEPROM version
Default (04000201)
[972] Virtual Keypad Language Version
[976] Radio Configuration File Version
[977] Cellular Network Provider - MCC/MNC Code
[978] Cellular Network Type
00 GPRS (2G)
01 EDGE (2G)
02 WCDMA (3G)
03 HSDPA (3G)
04 LTE (4G)
05 LTE Advanced (4G)
06 CDMA (2G)
07 EVDO (3G)
[979] Cellular Network CSQ
[980] Radio Reset Codes
[981] Radio Type
[982] Radio Firmware Version
[983] Firmware Update Diagnostics Section
[984] Communicator Status
[985] Radio Initialization Status
[986] System Toggle Options 4
[1] Remote Shutdown Enable Default (OFF).
[2] - [8] Reserved
[987] Language Version
[988] DNS 1 IP Address
[989] DNS 2 IP Address
[990] Boot Loader Version
[991] Communicator Firmware Version
[992] Ethernet IP Address
[993] Ethernet Gateway Address
[994] Cellular IP Address
[995] SIM Number
____________________________________
[996] Cellular Telephone Number
This number is required for DLS and Firmware
upgrades.
____________________________________
[997] IMEI Number
____________________________________
[998] MAC Address
System Reset Defaults
[999] Software Default
Default (99); Valid entries are 00- Default or 55-
Reset
55