User's Manual
Table Of Contents
- Table of Contents
- WARNING: Installer please read carefully
- General
- Model Information
- Panel Mounting
- Features
- Technical Specifications
- Ratings Compatibility
- Pre Installation Configuration
- Communicator Installation Configuration
- Installing Communicator in Panel
- Communicator Placement Test
- Initial Panel Programming
- SMS Command and Control
- Communicator Status LEDs
- Yellow Trouble LED
- Panel Supervision Trouble (2 Flashes)
- SIM Lock Trouble (4 Flashes)
- Cellular Trouble (5 Flashes)
- Ethernet Trouble (6 Flashes)
- Receiver Not Available (7 Flashes)
- Receiver Supervision Trouble (8 Flashes)
- FTC Trouble (9 Flashes)
- Module Configuration Trouble (12 Flashes)
- Red Network Connection Status LED
- (Green LED 1) (Green LED 2) and (Yellow LED) Signal Strength
- Network Activity LEDs - Red and Green(TL2803G(R)E / TL280LE(R) only)
- Communicator Troubleshooting
- Ethernet/Cellular Programming Options
- System Options
- Programming Options
- Communications Reporting Codes
- System Test Options
- Ethernet Receiver 1 Options
- Ethernet Receiver 2 Options
- Ethernet Options
- Cellular Receiver 1 Options
- Cellular Receiver 2 Options
- Cellular Options
- SMS Event Notification/Command and Control Options
- External Event Label Programming
- Receiver Diagnostic Testing
- System Information (Read Only)
- System Reset Defaults
- Ethernet Cellular Programming Worksheets
- System Options
- Programming Options
- System Test Options
- Ethernet Receiver 1 Options
- Ethernet Receiver 2 Options
- Ethernet Options
- Cellular Receiver 1 Options
- Cellular Receiver 2 Options
- Cellular Options
- Command and Control Options
- External Event Label Programming
- Receiver Diagnostic Testing
- System Information (Read Only)
- System Reset Defaults
- Limited Warranty
- EULA
- Regulatory Information
[856] Activate Command Output 2
Default (Activate Command Output 2)
_______________________________________
[857] Activate Command Output 3
Default (Activate Command Output 3)
_______________________________________
[858] Activate Command Output 4
Default (Activate Command Output 4)
_______________________________________
[859] Deactivate Command Output 1
Default (Deactivate Command Output 1)
_______________________________________
[860] Deactivate Command Output 2
Default (Deactivate Command Output 2)
_______________________________________
[861] Deactivate Command Output 3
Default (Deactivate Command Output 3)
_______________________________________
[862] Deactivate Command Output 4
Default (Deactivate Command Output 4)
_______________________________________
[863] Bypass
Default (Bypass)
_______________________________________
[864] Unbypass
Default (Unbypass)
_______________________________________
[865] Status Request
Default (Status Request)
_______________________________________
[866] Alarm Memory Request
Default (Alarm Memory Request)
_______________________________________
[867] Help
Default (Help)
_______________________________________
[868] Pay As You Go Balance Request
Default (Balance Request)
_______________________________________
[869] Keypad Message
Default (Keypad Message)
_______________________________________
[870] Function Successful
Default (Successful)
_______________________________________
[871] Function Failure
Default (Unsuccessful)
_______________________________________
[872] Invalid Command
Default (Invalid Command)
_______________________________________
[873] System Stay Armed
Default (Stay Armed)
_______________________________________
[874] System Away Armed
Default (Away Armed)
_______________________________________
[875] System Night Armed
Default (Night Armed)
_______________________________________
[876] System Disarmed Ready
Default (Disarmed Ready)
_______________________________________
[877] System Disarmed, Not Ready
Default (Disarmed Not Ready)
_______________________________________
[878] System In Alarm
Default (is in Alarm)
_______________________________________
[879] Trouble Label
Default (Service is Required)
_______________________________________
[880] No Alarms in Memory
Default (No Alarms in Memory)
_______________________________________
[881] Pay As You Go Balance
Default (Pay as you go balance:)
_______________________________________
[882] Pay As You Go Message
Default (*123#)
_______________________________________
[883] Response Code
Default (Response Code)
_______________________________________
Receiver Diagnostic Testing
[901] Diagnostic Test Transmission
[1] Ethernet 1 Default (OFF).
[2] Ethernet 2 Default (OFF).
[3] Cellular 1 Default (OFF).
[4] Cellular 2 Default (OFF).
[961] Cellular Inactivity Timeout
Default (41)
Valid entries from, 00 to FF.
[962] CREG Max Registration
Default (C8)
Valid entries from, 00 to FF.
[963] Retransmission Delay
Default (2D)
Valid entries from, 00 to FF.
54