User's Manual
Table Of Contents
- Table of Contents
- WARNING: Installer please read carefully
- General
- Model Information
- Panel Mounting
- Features
- Technical Specifications
- Ratings Compatibility
- Pre Installation Configuration
- Communicator Installation Configuration
- Installing Communicator in Panel
- Communicator Placement Test
- Initial Panel Programming
- SMS Command and Control
- Communicator Status LEDs
- Yellow Trouble LED
- Panel Supervision Trouble (2 Flashes)
- SIM Lock Trouble (4 Flashes)
- Cellular Trouble (5 Flashes)
- Ethernet Trouble (6 Flashes)
- Receiver Not Available (7 Flashes)
- Receiver Supervision Trouble (8 Flashes)
- FTC Trouble (9 Flashes)
- Module Configuration Trouble (12 Flashes)
- Red Network Connection Status LED
- (Green LED 1) (Green LED 2) and (Yellow LED) Signal Strength
- Network Activity LEDs - Red and Green(TL2803G(R)E / TL280LE(R) only)
- Communicator Troubleshooting
- Ethernet/Cellular Programming Options
- System Options
- Programming Options
- Communications Reporting Codes
- System Test Options
- Ethernet Receiver 1 Options
- Ethernet Receiver 2 Options
- Ethernet Options
- Cellular Receiver 1 Options
- Cellular Receiver 2 Options
- Cellular Options
- SMS Event Notification/Command and Control Options
- External Event Label Programming
- Receiver Diagnostic Testing
- System Information (Read Only)
- System Reset Defaults
- Ethernet Cellular Programming Worksheets
- System Options
- Programming Options
- System Test Options
- Ethernet Receiver 1 Options
- Ethernet Receiver 2 Options
- Ethernet Options
- Cellular Receiver 1 Options
- Cellular Receiver 2 Options
- Cellular Options
- Command and Control Options
- External Event Label Programming
- Receiver Diagnostic Testing
- System Information (Read Only)
- System Reset Defaults
- Limited Warranty
- EULA
- Regulatory Information
[818] Zone Bypassed
Default (Zone Bypassed)
_______________________________________
[819] Zone Unbypassed
Default (Zone Unbypassed)
_______________________________________
[820] Burglary Verified
Default (Burglary Verified)
_______________________________________
[821] Burglary Not Verified
Default (Burglary Not Verified)
_______________________________________
[822] Alarm Cancelled
Default (Alarm Cancelled)
_______________________________________
[823] Holdup Verified
Default (Holdup Verified)
_______________________________________
[824] Walk Test Begin
Default (Walk Test Begin)
_______________________________________
[825] Walk Test End
Default (Walk Test End)
_______________________________________
[826] System Test
Default (Test Message)
_______________________________________
[827] Periodic Test Transmission
Default (Periodic Test)
_______________________________________
[828] Periodic Test With Trouble
Default (Periodic Test With Trouble)
_______________________________________
[829] DLS Remote Programming Begin
Default (Remote Programming Begin)
_______________________________________
[830] DLS Remote Programming End
Default (Remote Programming End)
_______________________________________
[831] SA Remote Programming Begin
Default (Remote Programming Begin)
_______________________________________
[832] SA Remote Programming End
Default (Remote Programming End)
_______________________________________
[833] Installer Lead In
Default (Local Programming Begin)
_______________________________________
[834] Installer Lead Out
Default (Local Programming End)
_______________________________________
[835] Firmware Update Begin
Default (Firmware Update Begin)
_______________________________________
[836] Firmware Update Successful
Default (Firmware Update Successful)
_______________________________________
[837] Firmware Update Fail
Default (Firmware Update Fail)
_______________________________________
[838] Delinquency
Default (Delinquency)
_______________________________________
[839] Keypad Lockout
Default (Keypad Lockout)
_______________________________________
[840] Event Log 75% full
Default (Event Log Near Full)
_______________________________________
[841] FTC Trouble
Default (fail to communicate trouble)
_______________________________________
[842] FTC Restore
Default (fail to communicate restore)
_______________________________________
[843] Panel Absent Trouble
Default (Panel Communications Trouble)
_______________________________________
[844] Panel Absent Trouble Restore
Default (Panel Communications Restore)
_______________________________________
[845] Module Reprogramming
Default (Communicator Programming Updated)
_______________________________________
[846] Firmware Update
Default (Communicator Programming Updated)
_______________________________________
[850] Module
Default (Module)
_______________________________________
[851] Stay Arm
Default (Stay Arm)
_______________________________________
[852] Away Arm
Default (Away Arm)
_______________________________________
[853] Night Arm
Default (Night Arm)
_______________________________________
[854] Disarm
Default (Disarm)
_______________________________________
[855] Activate Command Output 1
Default (Activate Command Output 1)
_______________________________________
53