User's Manual
Table Of Contents
- Table of Contents
- WARNING: Installer please read carefully
- General
- Model Information
- Panel Mounting
- Features
- Technical Specifications
- Ratings Compatibility
- Pre Installation Configuration
- Communicator Installation Configuration
- Installing Communicator in Panel
- Communicator Placement Test
- Initial Panel Programming
- SMS Command and Control
- Communicator Status LEDs
- Yellow Trouble LED
- Panel Supervision Trouble (2 Flashes)
- SIM Lock Trouble (4 Flashes)
- Cellular Trouble (5 Flashes)
- Ethernet Trouble (6 Flashes)
- Receiver Not Available (7 Flashes)
- Receiver Supervision Trouble (8 Flashes)
- FTC Trouble (9 Flashes)
- Module Configuration Trouble (12 Flashes)
- Red Network Connection Status LED
- (Green LED 1) (Green LED 2) and (Yellow LED) Signal Strength
- Network Activity LEDs - Red and Green(TL2803G(R)E / TL280LE(R) only)
- Communicator Troubleshooting
- Ethernet/Cellular Programming Options
- System Options
- Programming Options
- Communications Reporting Codes
- System Test Options
- Ethernet Receiver 1 Options
- Ethernet Receiver 2 Options
- Ethernet Options
- Cellular Receiver 1 Options
- Cellular Receiver 2 Options
- Cellular Options
- SMS Event Notification/Command and Control Options
- External Event Label Programming
- Receiver Diagnostic Testing
- System Information (Read Only)
- System Reset Defaults
- Ethernet Cellular Programming Worksheets
- System Options
- Programming Options
- System Test Options
- Ethernet Receiver 1 Options
- Ethernet Receiver 2 Options
- Ethernet Options
- Cellular Receiver 1 Options
- Cellular Receiver 2 Options
- Cellular Options
- Command and Control Options
- External Event Label Programming
- Receiver Diagnostic Testing
- System Information (Read Only)
- System Reset Defaults
- Limited Warranty
- EULA
- Regulatory Information
[783] Panel Auxiliary Power Restore
Default (Auxiliary Power Restore)
_______________________________________
[784] Panel Battery Trouble
Default (Battery Trouble)
_______________________________________
[785] Panel Battery Restore
Default (Battery Trouble Restore)
_______________________________________
[786] Panel Bell Circuit Trouble
Default (Bell Circuit Trouble)
_______________________________________
[787] Panel Bell Circuit Restore
Default (Bell Circuit Restore)
_______________________________________
[788] Panel Telephone Line Trouble
Default (Telephone Line Failure)
_______________________________________
[789] Panel Telephone Line Restore
Default (Telephone Line Restore)
_______________________________________
[790] Fail to Communicate Trouble
Default (Fail to Communicate Trouble)
_______________________________________
[791] Fail to Communicate Restore
Default (Fail to Communicate Restore)
_______________________________________
[792] Fire Trouble
Default (Fire Trouble)
_______________________________________
[793] Fire Trouble Restore
Default (Fire Trouble Restore)
_______________________________________
[794] Zone Tamper
Default (Zone Tamper)
_______________________________________
795] Zone Tamper Restore
Default (Zone Tamper Restore)
_______________________________________
[796] Zone Fault
Default (Zone Fault)
_______________________________________
[797] Zone Fault Restore
Default (Zone Fault Restore)
_______________________________________
[798] Alternate Communicator Trouble
Default (Alternate Communicator Trouble)
_______________________________________
[799] Alternate Communicator Restore
Default (Alternate Communicator Restore)
_______________________________________
[800] Module Trouble
Default (Module Trouble)
______________________________________
[801] Module Trouble Restore
Default (Module Trouble Restore)
_______________________________________
[802] Wireless/AML Device Trouble
Default (Device Trouble)
_______________________________________
[803] Wireless/AML Device Restore
Default (Device Trouble Restore)
_______________________________________
[804] Disarmed By
Default (Disarmed By)
_______________________________________
[805] Armed By
Default (Armed By)
_______________________________________
[806] Disarmed
Default (Disarmed)
_______________________________________
[807] Armed
Default (Armed)
_______________________________________
[808] Automatic Disarming
Default (Automatic Disarming)
_______________________________________
[809] Automatic Arming
Default (Automatic Arming)
_______________________________________
[810] Automatic Arming Cancelled
Default (Automatic Arming Cancelled)
_______________________________________
[811] Late to Open
Default (Late to Open)
_______________________________________
[812] Late to Close
Default (Late to Close)
_______________________________________
[813] Disarmed After Alarm
Default (Disarmed After Alarm)
_______________________________________
[814] Alarm Ocurred After Arming
Default (Alarm Ocurred After Arming)
_______________________________________
[815] Exit Fault
Default (Exit Fault)
_______________________________________
[816] Cold Start
Default (Cold Start)
_______________________________________
[817] Armed With Zones Bypassed
Default (Armed With Zones Bypassed)
_______________________________________
52