User's Manual
Table Of Contents
- Table of Contents
- WARNING: Installer please read carefully
- General
- Model Information
- Panel Mounting
- Features
- Technical Specifications
- Ratings Compatibility
- Pre Installation Configuration
- Communicator Installation Configuration
- Installing Communicator in Panel
- Communicator Placement Test
- Initial Panel Programming
- SMS Command and Control
- Communicator Status LEDs
- Yellow Trouble LED
- Panel Supervision Trouble (2 Flashes)
- SIM Lock Trouble (4 Flashes)
- Cellular Trouble (5 Flashes)
- Ethernet Trouble (6 Flashes)
- Receiver Not Available (7 Flashes)
- Receiver Supervision Trouble (8 Flashes)
- FTC Trouble (9 Flashes)
- Module Configuration Trouble (12 Flashes)
- Red Network Connection Status LED
- (Green LED 1) (Green LED 2) and (Yellow LED) Signal Strength
- Network Activity LEDs - Red and Green(TL2803G(R)E / TL280LE(R) only)
- Communicator Troubleshooting
- Ethernet/Cellular Programming Options
- System Options
- Programming Options
- Communications Reporting Codes
- System Test Options
- Ethernet Receiver 1 Options
- Ethernet Receiver 2 Options
- Ethernet Options
- Cellular Receiver 1 Options
- Cellular Receiver 2 Options
- Cellular Options
- SMS Event Notification/Command and Control Options
- External Event Label Programming
- Receiver Diagnostic Testing
- System Information (Read Only)
- System Reset Defaults
- Ethernet Cellular Programming Worksheets
- System Options
- Programming Options
- System Test Options
- Ethernet Receiver 1 Options
- Ethernet Receiver 2 Options
- Ethernet Options
- Cellular Receiver 1 Options
- Cellular Receiver 2 Options
- Cellular Options
- Command and Control Options
- External Event Label Programming
- Receiver Diagnostic Testing
- System Information (Read Only)
- System Reset Defaults
- Limited Warranty
- EULA
- Regulatory Information
[1] UDP Polling Default (OFF)
[2] TCP Polling Default (OFF)
[3] Real-time Notification Default (OFF)
[4] Notification Follows Poll Default (OFF)
[5] Reserved
[6] Reserved
[7] Reserved
[8] Reserved
[427] Session 1 Interactive Polling Interval in Seconds
Default (000A)
This option controls the polling interval from the alarm panel to the integration interface for the purpose of
optimizing data usage. The shorter the interval, the higher the data usage.
Valid range: 0000-FFFF
[428] Session 1 Integration Server IP
This section displays the IP address of the third party server. Do not program this section if a domain
name is programmed in setion [431].
[429] Session 1 Integration Notification Port
Default (0C00/00372)
This section is used to program the TCP Integration port for real time notification
[430] Session 1 Integration Polling Port
Default (0C01/00373)
This section is used to program the integration server port. Refer to third party device manual for more
information.
[431] Session 1 Integration Server DNS
Enter the domain name (up to 32 ASCII characters) as provided by a third-party device. Refer to third
party device manual for more information.
[432] Session 1 Integration Outgoing Port
Default (0C04/3076)
This section is used to program the outgoing port for integration via UDP.
[433]Session 1 Integration Incoming Port
Default (0BFF/3071)
This section is used to program incoming port for integration via TCP.
[434] Session 1 Notification Zone 1-8 Toggle [435] Session 1 Notification Zone 9-16 Toggle
[1] Zone 1 Default (ON) [1] Zone 9 Default (ON)
[2] Zone 2 Default (ON) [2] Zone 10 Default (ON)
[3] Zone 3 Default (ON) [3] Zone 11 Default (ON)
[4] Zone 4 Default (ON) [4] Zone 12 Default (ON)
[5] Zone 5 Default (ON) [5] Zone 13 Default (ON)
[6] Zone 6 Default (ON) [6] Zone 14 Default (ON)
[7] Zone 7 Default (ON) [7] Zone 15 Default (ON)
[8] Zone 8 Default (ON) [8] Zone 16 Default (ON)
[436] Session 1 Notification Zone 17-24 [437] Session 1 Notification Zone 25-32 Toggle
[1] Zone 17 Default (ON) [1] Zone 25 Default (ON)
[2] Zone 18 Default (ON) [2] Zone 26 Default (ON)
[3] Zone 19 Default (ON) [3] Zone 27 Default (ON)
[4] Zone 20 Default (ON) [4] Zone 28 Default (ON)
[5] Zone 21 Default (ON) [5] Zone 29 Default (ON)
[6] Zone 22 Default (ON) [6] Zone 30 Default (ON)
[7] Zone 23 Default (ON) [7] Zone 31 Default (ON)
[8] Zone 24 Default (ON) [8] Zone 32 Default (ON)
31