User's Manual

Chapter 3.0 Arming the System
Whentheexitdelayhasexpired,thesystemisarmedandindicatedbythefollowingconditions:
l TheReadyindicatorturnsoff.
l TheArmedindicatorstayson.
l Thekeypadissilent.
Note:InAwayArmingmode,manuallybypassedzonesareloggedandcommunicatedtothecent-
ralstation.
IfyoursystemisinstalledinaccordancewithSIACP-01StandardforFalseAlarmReduction,the
followingconditionapplies:Violationandrestoral,followedbyasecondviolationoftheentry/exit
zonebeforetheendoftheexitdelay,restartstheexitdelay.
Note:Thisfunctionisavailableonthetabletanduserapp.
3.4 Quick Exit
Ifthesystemisarmedandyoumustexit,usetheQuickExitfunctiontoavoiddisarmingandrearm-
ingthesystem.Usingthisfunctiongivesyou2minutestoexitthepremises.Whenthedoorisclosed
afterexiting,theremainingexittimeiscancelled.
3.5 Arming Errors and Exit Faults
Yoursecuritysystemaudiblynotifiesyouofanyerrorswhenyouareattemptingtoarmthesystem
orexitthepremises.
3.5.1 Arming Error
Anerrortone(longbeep)soundsifthesystemisunabletoarm.Armingerrorsoccurunderthefol-
lowingconditions:
l Thesystemisnotreadytoarm,i.e.sensorsareopen
l
Theenteredusercodeisincorrect.
l
Apresenttroublecondition.
Ensureallsensorsaresecureandthesystemisreadytoarm,thentryagain.
3.5.2 Audible Exit Fault
Toreducefalsealarms,theAudibleExitFaultnotifiesyouofanimproperexitwhenarmingthesys-
tem.Iftheentry/exitdoorisnotsecurelyclosedduringtheprogrammedexitdelay,thesystemwill
soundthealarmtoindicateanimproperexit.
Note:Yourinstallermustenablethisfeature.

Tocorrectandexitfault,dothefollowingsteps:
1. Re-enterthepremises.
2. Enteryouraccesscodetodisarmthesystembeforetheentrydelaytimerexpires
3. Ensureallsensorsaresecureandthesystemisreadytoarm.
4. RepeattheAwayarmingprocedure.
3.6 Alarm Cancel Window
Thereisaperiodoftimeinwhichyoucancancelthealarmtransmission.Whentheprogrammed
alarmtransmissiondelayexpires,cancellinganalarmsendsamessagetothecentralmonitoringsta-
tion.Whenthecancellationmessageissuccessfullytransmitted,thesystembeepssixtimes.
Note:Yourinstallercanenableandconfigurethisfeature.
- 11 -