User's Manual

responsibility for the properselection, installation, operation and maintenance of
anyproducts purchased from DSC. Custom productsare onlywarranted to the
extent that theydo not function upon delivery.In such cases, DSCcan replace or
creditat itsoption.
International Warranty
The warranty for internationalcustomers is the same as forany customer within
Canada and the United States, with the exception that DigitalSecurity Controls
shallnot be responsible for anycustoms fees,taxes, orVATthat maybe due.
Warranty Procedure
To obtain service underthis warranty, please return the item(s)in question to the
point of purchase. All authorized distributors and dealers have a warranty pro-
gram. Anyone returning goods to Digital Security Controls must first obtain an
authorization number.DigitalSecurityControlswillnot accept anyshipment what-
soeverfor which priorauthorization hasnot been obtained.
Conditions to Void Warranty
Thiswarrantyappliesonly to defectsin parts and workmanship relating to normal
use. It doesnot cover:
l damage incurred in shipping or handling;
l damage caused bydisastersuch asfire, flood, wind, earthquake orlight-
ning;
l damage due to causesbeyond the controlof DigitalSecurityControls such
asexcessive voltage, mechanicalshockorwater damage;
l damage caused byunauthorized attachment, alterations, modificationsor
foreign objects;
l damage caused byperipherals(unlesssuch peripheralswere supplied by
DigitalSecurityControls);
l defectscaused byfailure to provide a suitable installation environment for
the products;
l damage caused byuse of the productsforpurposesother than those for
which it was designed;
l damage fromimpropermaintenance;
l damage arising out of any otherabuse, mishandling orimproper application
of the products.
Items Not Covered by Warranty
In addition to the itemswhich void the Warranty, the following itemsshall not be
covered byWarranty: (i)freight cost to the repaircentre; (ii)productswhich are not
identified with DSC'sproduct labeland lot number or serial number; (iii) products
disassembled orrepaired in such a mannerasto adverselyaffect performance or
prevent adequate inspection or testing to verifyany warranty claim. Access cards
ortags returned for replacement under warranty will be credited or replaced at
DSC'soption. Productsnot covered bythiswarranty,orotherwise out of warranty
due to age, misuse, ordamage shall be evaluated, and a repairestimate shall be
provided. No repair workwill be performed untila valid purchase orderis received
from the Customer and a Return Merchandise Authorisation number (RMA) is
issued byDSC'sCustomerService.
DigitalSecurity Controls’s liability for failure to repair the product under this war-
rantyaftera reasonable numberof attemptswillbe limited to a replacement of the
product, asthe exclusive remedyfor breach of warranty. Under no circumstances
shallDigitalSecurityControlsbe liable for anyspecial, incidental, or consequential
damages based upon breach of warranty, breach of contract, negligence, strict
liability,or any other legaltheory. Such damages include, but are not limited to,
lossof profits, loss of the productor any associated equipment, cost of capital,
costof substitute orreplacement equipment, facilitiesorservices, down time, pur-
chaser’stime, the claimsof third parties, including customers, and injury to prop-
erty. The laws of some jurisdictions limit or do not allow the disclaimer of
consequentialdamages. If the laws of such a jurisdiction apply to any claimby or
against DSC, the limitations and disclaimers contained here shall be to the
greatest extent permitted bylaw. Some statesdo not allow the exclusion or lim-
itation of incidental orconsequential damages, so that the above maynot apply
to you.
Disclaimer of Warranties
This warranty contains the entire warranty and shall be in lieu of any
and all other warranties, whether expressed or implied (including all
implied warranties of merchantability or fitness for a particular pur-
pose) And of all other obligations or liabilities on the part of Digital
Security Controls Digital Security Controls neither assumes respons-
ibility for, nor authorizes any other person purporting to act on its
behalf to modify or to change this warranty, nor to assume for it any
other warranty or liability concerning this product.
This disclaimer of warranties and limited warranty are governed by the
laws of the province of Ontario, Canada.
DigitalSecurityControlsrecommendsthat the entire systembe completely tested
on a regularbasis. However, despite frequent testing, and due to, but not limited
to, criminaltampering orelectrical disruption, it ispossible for thisproduct to fail to
performasexpected.
Installer’s Lockout
Anyproductsreturned to DSC which have the Installer’sLockout option enabled
and exhibit no otherproblemswillbe subject to a service charge.
Out of Warranty Repairs
DigitalSecurityControlswillat itsoption repair orreplace out-of-warrantyproducts
which are returned to its factory according to the following conditions. Anyone
returning goodsto DigitalSecurityControlsmust first obtain an authorization num-
ber. Digital Security Controls will not accept anyshipment whatsoever for which
priorauthorization hasnot been obtained.
Products which Digital Security Controls determines to be repairable will be
repaired and returned. A set fee which Digital Security Controls has pre-
determined and which maybe revised from time to time, willbe charged for each
unitrepaired.
Productswhich Digital Security Controls determines not to be repairable will be
replaced by the nearest equivalent product available at that time. The current
market price of the replacement product will be charged for each replacement
unit.
Regulatory Information
MODIFICATION STATEMENT
DigitalSecurity Controls has not approved any changes or modifications to this
device bythe user. Any changesormodificationscould void the user’sauthority to
operate the equipment.
Digital Security Controls n’approuve aucune modification apportée à l’appareil
par l’utilisateur, quelle qu’en soit la nature. Tout changement ou modification
peuvent annulerle droitd’utilisation de l’appareilparl’utilisateur.
INTERFERENCE STATEMENT
Thisdevice complieswith Part 15 of the FCC Rulesand IndustryCanada licence-
exempt RSSstandard(s).Operation issubject to the following two conditions: (1)
thisdevice maynot cause interference, and (2)thisdevice must accept any inter-
ference, including interference that may cause undesired operation of the
device.
Le présent appareilest conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux con-
ditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'util-
isateurde l'appareil doitaccepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
WIRELESS NOTICE
Thisequipment complieswith FCC and IC radiation exposure limitsset forth for an
uncontrolled environment. The antenna should be installed and operated with
minimumdistance of 20 cmbetween the radiatorand yourbody.
Antenna gain mustbe below:
Frequency Band TL255GR-E, TL25535-E, 3G2055R-E, 3G2055-E
GSM850 / FDD V 6.69 dBi
PCS1900 /FDD II
9.31 dBi
Thistransmittermust not be co-located oroperating in conjunction with any other
antenna ortransmitter.
Cet appareil est conforme aux limites d'exposition aux rayonnements de la IC
pour un environnement non contrôlé. L'antenne doit être installé de façon à
garder une distance minimale de 20 centimètres entre la source de ray-
onnementset votre corps.Gain de l'antenne doitêtre ci-dessous:
Bande de fréquence TL255GR-E, TL25535-E, 3G2055R-E, 3G2055-E
GSM850 /FDD V
6.69 dBi
PCS1900 /FDD II
9.31 dBi
L'émetteurne doit pasêtre colocalisé ni fonctionnerconjointement avecà autre
antenne ou autre émetteur.
FCC CLASS B DIGITAL DEVICE NOTICE
Thisequipment has been tested and found to comply with the limits fora Class B
digitaldevice, pursuant to part 15 of the FCC Rules. These limitsare designed to
provide reasonable protection against harmfulinterference in a residential install-
ation. This equipment generatesuses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harm-
fulinterference to radio communications. However, there is no guarantee that
interference willnot occur in a particular installation. If thisequipment does cause
harmfulinterference to radio ortelevision reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference byone ormore of the following measures:
•Reorient orrelocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different fromthat to which the
receiverisconnected.
•Consultthe dealer oran experienced radio/TVtechnician forhelp
CAN ICES-3 (B)/ NMB-3 (B)
FCC ID:F5315TL2553GRE
Industry Canada Compliance Statement
ThisEquipment meetsthe applicable IndustryCanada TerminalEquipment Tech-
nical Specifications. This is confirmed by the registration number. The abbre-
viation, IC, before the registration number signifies that registration was
performed based on a Declaration of Conformityindicating that IndustryCanada
technical specifications were met. It does not imply that that Industry Canada
approved the equipment. The Ringer Equivalence Number (REN) for this ter-
minalequipment is 0.0. The REN assigned to each terminalequipment provides
an indication of the maximumnumber of terminals allowed to be connected to a
telephone interface. The termination on an interface may consist of any
35