User's Manual

22
7 Managing Users
7.1 User Codes
Up to 95 different users can be programmed in the HS Series. Each user can be:
• Uniquely labeled.
• Assigned an access code.
• Assigned a proximity tag and/or wireless key (key fob). In order to operate, proximity tags and wire-
less keys must be enrolled in the system.
• Assigned to only operate specific partitions. For more information on partitions see section 10 "Man-
aging Partitions".
• Configured with additional attributes. For more information see 7.2 "Configuring additional User
Options".
Programed zones are flagged in the LCD screen. For more information on user flags see Table 7-1.
NOTE: Your installer configures all access codes to be either 4 or 6 digits. You cannot have access codes
of both lengths on your system.
Table 7-1 User Flags
LCD Display Flag Description
User Code 01 -
- Unprogrammed code.
User Code 01 P
P Programmed code.
User Code 01 T
T Code and tag/key are programmed.
To Access the User Codes Menu What you see
1. Press
OR
press and use the scroll keys to navigate to User Codes and
press .
Press (*) for <>
User Functions
2. Enter [Master or supervisor code] and scroll through the list of Users. To edit a
desired user press .
Enter Master
Access Code
then
Press (*) for <>
{User Label}
3. To go back to the Ready state press .
*
5
*
*
*
#
DRAFT 3