User's Manual

12 Additional Features

12.1 Audio Verification

Allows the monitoring station to initiate a 2-way audio (talk/listen) or 1-way audio (listen-in only) session

when an alarm has been received. This feature is used to verify the nature of the alarm or determine the

type of assistance required by the occupant.

12.2 Video Verification

Allows the monitoring station to use video clips captured from system motion cameras for verification of

any alarms.

12.2.1 System Lockout due to Invalid Attempts

If too many invalid access codes are entered, your system can be configured to automatically lock out

inputs from all keypads, wireless and proximity keys, and SMS commands for a specified duration. When

any keys are pressed, an error tone will sound. FAP keys are still active during Keypad Lockout.

12.3 Command Outputs

While being useful for many applications, Command outputs are typically configured to operate items such

as garage doors or electric gates.

NOTE: Must be configured by installer.

NOTE: Feature and lockout duration must be configured by installer.

NOTE: Must be configured by installer.

To Activate a Command Output What you see

1. Press and if required enter your [access code].

press and use the scroll keys to navigate to Output Control.

Output Control <>

Scroll to View

2. Press the number configured to or use the scroll keys to navigate to

the desired command.

Output

Activated

DRAFT 3