User's Manual

ManualsBrandsDigital Security Controls ManualsElectronicsKeypad with PowerG wireless receiver and prox

7 Managing Users

7.1.5 Assigning a Partition to a User code

User codes can be configured to have access only to specific partitions. For more information see section

10 "Managing Partitions".

7.2 Configuring additional User Options

Users can also be assigned the following options:

2. Use the arrow keys to move the cursor to a blank space or existing

character.

Program Name

{User 1 Label}

3. Press the number key corresponding to the appropriate letter as shown in Fig-

ure 7-1.

4. When the required letter or number is displayed use the arrow keys to

scroll to the next letter.

5. When finished, press the key, use the keys to scroll to Save

then press .

NOTE: Partitions are configured by your installer.

To Assign a Partition to a User code What you see

1. From the User Codes menu press or scroll to Partition Assign

and press .

Press (*) for <>

Partition Assign

2. Press to toggle assigning, Y or N, the partition to the user.

(*) To Toggle <>

{Partition Lb} Y

Supervisor Use when you want to allow additional users to manage User Codes or User

Functions. Supervisor codes created by the master code will have the same

attributes as the master code. Supervisor codes created by another supervisor

code will have the same attributes, except the supervisor attribute. Must be

assigned manually afterwards. After creation, attributes can be changed for all

supervisor codes.

Duress Code Use when forced to access your keypad under threat. A Duress Code operates

your system normally but transmits a Duress Report to your monitoring sta-

tion.

Zone Bypass Grants the user the ability to bypass zones.

Remote Access Grants the user the ability to use SMS features. For more information see 6.3

"SMS Command and Control"

Bell Squawk Use to generate a bell squawk when arming/disarming the system.

One Time Use Use when needing to grant someone one time access to your home for a 24-

hour period, i.e., a cleaning person or contractor. During the 24-hour period the

user can only disarm the system once, but has no restriction on the number of

times they can arm the system.

To Configure additional User Options What you see

1. From the desired user code press or scroll to User Options and

press .

Press (*) for <>

User Options

To Edit a User Label (Continued) What you see

DRAFT 3