User's Manual
4 Securing the Premises
15
4.5.1 Bypass Groups
Program frequently bypassed zones into the system as a bypass group. Using bypass groups avoids
individually bypassing each zone. One bypass group can be programmed per partition.
3. Press or . If required enter your [access code].
Scroll to <>
Bypass Zones
4. Scroll to the Bypass Options menu using the keys.
Press (*) for <>
Bypass Options
5. Press to enter the Bypass Options menu and scroll to Clear Bypasses.
Press (*) for <>
Clear Bypasses
6. Press to clear all bypass flags.
Bypass Cleared
Zones Unbypassed
7. To exit bypassing mode and return to the Ready state, press .
System is
Ready to Arm
NOTE: This feature is not to be used in UL listed installations.
To Program a Bypass Group What you see
1. Check that the Ready indicator is on and the system is disarmed.
Date Time
JAN 02/13 2:06a
2. Press to enter the function menu.
Press (*) for <>
Zone Bypass
3. Press or . If required enter your [access code].
Scroll to <>
Bypass Zones
4. Scroll to and flag all zones you want bypassed.
Upstrs H Wdw <>
B
5. Once all zones to be bypassed are flagged, scroll to the Bypass Options menu
and press .
Press (*) for <>
Bypass Options
6. Scroll to Prg Bypass and press .
Press (*) for <>
Prg Bypass
7. The Bypass Group is now programmed. The keypad will beep three times.
There will be no visual confirmation message.
Press (*) for <>
Zone Bypass
8. To exit bypassing mode and return to the Ready state, press .
System is
Ready to Arm
To Load a Bypass Group What you see
1. Check that the Ready indicator is on and the system is disarmed.
Date Time
JAN 02/13 2:06a
2. Press to enter the function menu.
Press (*) for <>
Zone Bypass
3. Press or . If required enter your [access code].
Scroll to <>
Bypass Zones
4. Scroll to the Bypass Options menu and press .
Press (*) for <>
Bypass Options
5. Scroll to Bypass Group and press .
Press (*) for <>
Bypass Group
To Clear the Bypass Flag from All Zones (Continued) What you see
*
1
*
*
*
*
*
1
*
*
#
*
*
1
*
*
DRAFT 3