User's Manual

The alarm panel determines the type of device being enrolled and presents the appro-

priate programming options.

Table 2-2 Wireless Device Options

3. Use the scroll keys or type in the corresponding number to select an option.

4. Scroll through the available selections, key in a number or enter text as appropriate.

5. Press [*] to accept and move to the next option.

6. Once all options are configured, the system prompts to enroll the next device.

Repeat the process described above until all wireless devices are enrolled.

NOTE: Configuration options for wireless devices are set using [804]>[201] Modify

Device.

Pre-enroll (use to enroll devices prior to installation)

Part 1:

1. Enter the following Installer Programming section:

[804] (Wireless Programming) > [000] (Add Wireless Devices)

2. Press [*]. When prompted, enter the device ESN.

The alarm panel determines the type of device being enrolled and presents the appro-

priate programming options (see Table 2-2).

3. Use the scroll keys or type in the corresponding number to select an option.

4. Scroll through the available selections, key in a number or enter text as appropriate.

5. Press [*] to accept and move to the next option.

6. Once all options are configured, the system prompts to pre-enroll the next device.

Repeat the process described above until all wireless devices are pre-enrolled.

Part 2:

Once at the installation site, activate the device to complete enrollment. The alarm panel

does not have to be in Installer Programming mode.

2.4.5 [101]-[104] Delete Wireless Devices

To delete wireless devices:

1. Enter Installer Programming section [804] (Wireless Programming) then select one

of the following sub-sections:

Table 2-3 Module Label Sub-Sections

2. Select a device to delete using the scroll keys or go directly to a specific device by

entering a hotkey.

Device Type Programming Options

Zone (01) Zone type

(02) Partition assignment

(03) Zone label

Wireless key (01) User label

Siren (01) Partition assignment

(02) Siren label

Repeater (01) Repeater Label

Sub-Section Description

101 Delete wireless zone devices

102 Delete Wireless key

103 Delete sirens

104 Delete repeaters