User's Manual

4. Press [*] to accept the selection.

Press [#] to exit the section.

2.5.9 [700] Video Verification Programming

The central monitoring station can access video images from motion cameras to verify

Burglar, Fire or Panic alarms. Video can be transmitted in one of two ways:

• Video on demand: After receiving an alarm, the monitoring station can request

video verification.

• Video on alarm (default): Video is automatically transmitted to the monitoring sta-

tion when an alarm event occurs.

The following video verification options can be selected:

Table 2-12 Video Verification Programming Options

2.5.10 [997] View Module Information

This section is used to display the model, hardware revision and software version of the

HSM2HOST.

2.5.11 [999] Reset to Factory Defaults

Selecting this option resets all module programming to factory settings. Panel and other

module options are retained.

13 Global Away

Arm

33 System Test

View on Demand • Disable (Video on Alarm mode)

• All Arming Modes

• Away Arming Only

• Stay Arming Only

• Stay and Away Arming

• Disarm and Away Arming

• Disarm and Stay Arming

• Disarm Only

• View Time Window

• View Other Alarms

View Time Window

(video on demand)

•Always on

• Alarm + 5 minutes

• Alarm + 15 minutes

• Alarm + 1 hour

View Other Alarms

(non-burglar)

•Fire

• Duress code

•Emergency

•Panic