User's Manual

3G Alarm Communicator Installlation Manual
32
[615] Status Request
Default (Status Request);
Send this command to request the status of the system.
____________________________________
[616] Alarm Memory Request
Default (Alarm Memory Request);
Send this command to request the alarm memory from the system.
____________________________________
[617] Help
Default (Help);
Access Code is not required.
____________________________________
[621] Function Successful
Default (Successful);
Example: “stay armed successful.”
____________________________________
[622] Function Unsuccessful
Default (Unsuccessful);
Example: “stay armed unsuccessful.”
____________________________________
[623] Invalid Command
Default (Invalid Command);
Unprogrammable, enter correct command.
____________________________________
[624] System Stay Armed
Default (Stay Arm);
Included in the response message if the command was not accepted as a
valid SMS command.
____________________________________
[625] System Away Armed
Default (Away Arm);
Included in the response to a status request command if a partition is
away armed.
____________________________________
[626] System Night Armed
Default (Night Arm);
Included in the response to a status request command if a partition is night
armed.
____________________________________
[627] System Disarmed Ready
Default (Disarmed Ready);
Included in the response to a status request command if a partition is dis-
armed and is ready to arm.
____________________________________
[628] System Disarmed Not Ready
Default (Disarmed Not Ready);
Included in the response to a status request command if a partition is dis-
armed and is not ready to arm.
____________________________________
[629] System is in Alarm
Default (Stay Arm);
This label will be included in the response to an Alarm Memory Request
if there are no alarms on the system
____________________________________
[630] Trouble Label
Default (Service is Required);
Included in the response to the Alarm Memory command if there are no
alarms in memory.
____________________________________
[631] No Alarms in Memory
Default (No Alarm Memory);
Included in the response to the Alarm Memory command if there are no
alarms on the system.
____________________________________
[634] Error Code
Default (Error Code);
Included in the response to an Alarm Memory Request if there are no
alarms on the system
____________________________________