User's Manual

3G Alarm Communicator Installlation Manual Cellular Receiver 2 Options
31
[206] Cellular Receiver 1 Domain Name
Default ( )
 Programming not permitted on UL/ULC listed system.
32 Character ASCII characters.
____________________________________
CELLULAR RECEIVER 2 OPTIONS
[211] Cellular Receiver 2 Account Code
Default (0000000000)
Valid range: 0000000001 - FFFFFFFFFE.
|____|____|____|____|____|____|____|____|____|____|
[212] Cellular Receiver 2 DNIS
Default (000000)
Valid range: 000000 - 0FFFFF.
|____|____|____|____|____|____|
[213] Cellular Receiver 2 Address
Default (000.000.000.000)
Valid segment range: 000-255
|____|____|____||____|____|____||____|____|____|____|____|____|
[214] Cellular Receiver 2 Port
Default (0BF5/3061) Valid range: 0000 - FFFF.
|____|____|____|____|
[215] Cellular Receiver 2 APN
Default ( ) 32 ASCII characters.
____________________________________
[216] Cellular Receiver 2 Domain Name
Default ( )
 Programming not permitted on UL/ULC listed system.
32 ASCII characters.
____________________________________
CELLULAR OPTIONS
[221] Cellular Public Access Point Name
Default ( ) 32 ASCII characters
____________________________________
[222] Cellular Login User Name
Default ( ) 32 ASCII characters.
____________________________________
[223] Cellular Login Password
Default ( ) 32 ASCII characters.
____________________________________
[224] Cellular Test Transmission Time of Day
Default (9999) Valid range: 00 - 23 hrs. (HH) 00 - 59 min. (MM).
|____|____|____|____
[225] Cellular Test Transmission Cycle
Default (000000)
Valid range: 000000 - 999999 minutes.
|____|____|____|____|____|____|
[226] Cellular Trouble Delay
Default (00)
Program 00 disable or FF enable.
|____|____|
[301] Command and Control Toggle Options
|____| [1] Reserved Default ( )
|____| [2] Reserved Default ( )
|____| [3] SMS Command and Control Default (ON).
|____| [4] Reserved Default ( )
|____| [5] SMS Character Format
|____| [6] Long SMS Message Handling Default (OFF)
|____| [7] Reserved Default ( )
|____| [8] Reserved Default ( )
[311] - [318] SMS Phone Number 1 - 8
This section may be programmed through DLS IV or the keypad.
____________________________________
[321] - [328] SMS Phone Number 1 - 8 Toggle Options
|____| [1] SMS Notification Alarm/Restore Default (OFF)
|____| [2] SMS Notification Tamper/Restore Default (OFF)
|____| [3] SMS Notification Opening/Closing Default (OFF)
|____| [4] SMS Notification System Maintenance Default (OFF)
|____| [5] SMS Notification System Test Default (OFF)
|____| [6] SMS Notification Internal Events Default (OFF)
|____| [7] SMS Notification Enabled Default (OFF)
|____| [8] SMS Command and Control Enabled Default (ON)
[601] Stay Arm
Default (Stay Arm);
Send this command to the system to stay arm.
____________________________________
[602] Away Arm
Default (Away Arm);
Send this command to the system to away arm.
____________________________________
[603] Night Arm
Default (Night Arm);
Send this command to the system to night arm.
____________________________________
[604] Disarm
Default (Disarm);
Send this command to the system to night disarm.
____________________________________
[605] - [608] Activate Command Output 1 - 4
Default (Activate Command Output n);
Send this command to the system to activate a command output.
____________________________________
[609] - [612] Deactivate Command Output 1 - 4
Default (Deactivate Command Output n);
Send this command to the system to deactivate a command output.
____________________________________
[613] Bypass
Default (Bypass);
Send this command to the system to bypass a Zone.
____________________________________
[614] Unbypass
Default (Unbypass);
Send this command to the system to unbypass a Zone.
____________________________________