User's Manual

SMS Command and Control Response 2G Alarm Communicator Installlation Manual
28
[685] Notification Zone 25 - 32 Toggle Options
The default for each Notification Zone Toggle is OFF.
[686] Notification Zone 33 - 40 Toggle Options
The default for each Notification Zone Toggle is OFF.
[687] Notification Zone 41 - 48 Toggle Options
The default for each Notification Zone Toggle is OFF.
[688] Notification Zone 49 - 56 Toggle Options
The default for each Notification Zone Toggle is OFF.
[689] Notification Zone 57 - 64 Toggle Options
The default for each Notification Zone Toggle is OFF.
[691] Interactive Over data Server 1 account code
Default (0000000000)
The account code is used by interactive server to distinguish between different transmitters.
[692] Interactive Over data Server 1 DNIS
Default (0000000000)
The DNIS is used in addition to the account to identify the communicator module at the interactive server.
[693] Interactive Over 2G server 1 IP address
Default (000.000.000.000)
Enter the interactive over data server 1 IP address. This information will be provided by your interactive server administrator. Each 3
digit segment of the address must be within the valid range of 000-255.
NOTE: When a valid IP address has been entered, the interactive server is enabled and will communicate events over the data channel.
[694] Interactive over 2G server 1 TCP port
Default ( )
This Section determines the TCP port used by interactive server 1 for control response. Change the default value of this port when your
installation is located behind a firewall, and must be assigned a particular port number as determined by your central station system
administrator.
Valid range: 0000 - FFFF
[695] Interactive over 2G server 1 UDP port
Default ( )
This Section determines the UDP port used by interactive server 1 t events communication. Change the default value of this port when
your installation is located behind a firewall, and must be assigned a particular port number as determined by your central station sys-
tem administrator.
Valid range: 0000 - FFFF.
[696] Interactive over 2G server 1 APN
Default ( )
The Access Point Name (APN) determines the interactive server network that the Communicator will connect to. This information is
available from your network carrier. Program this Section as 32 ASCII characters.
NOTE: The Server 1 APN should be same as the receiver 1 APN in section [205].
[697] Interactive over 2G server 1 Domain name
Default ( )
Table 29: Notification Zone 25 - 32 Toggle
TOGGLE 01 02 03 04 05 06 07 08
ZONE
25 26 27 28 29 30 31 32
Table 30: Notification Zone 33 - 40 Toggle
TOGGLE 01 02 03 04 05 06 07 08
ZONE
33 34 35 36 37 38 39 40
Table 31: Notification Zone 41 - 48 Toggle
TOGGLE 01 02 03 04 05 06 07 08
ZONE
41 42 43 44 45 46 47 48
Table 32: Notification Zone 49 - 56 Toggle
TOGGLE 01 02 03 04 05 06 07 08
ZONE
49 50 51 52 53 54 55 56
Table 33: Notification Zone 57 - 64 Toggle
TOGGLE 01 02 03 04 05 06 07 08
ZONE
57 58 59 60 61 62 63 64
29008218R001_NOVA_TL255GS_GS2055_V.2.5X_IM_ENG_NA_UL_ULC_FCC_IC_dft_03