User's Manual

2G Alarm Communicator Installlation Manual SMS Notification
21
[311] - [318] SMS Phone Number 1 - 8
Default ( );
These Sections may be programmed through DLS IV or the keypad. Up to 8 SMS telephone numbers (4 - 32 digits) can be pro-
grammed in Section [31x] Where x is an SMS telephone number from 1 to 8. Leaving programming blank for a telephone number will
disable that number. The User can program their own mobile telephone numbers at the keypad using [*] [6] <> “SMS Programming”.
The SMS Command and Control feature utilize the SMS messaging service provided by the Cellular network and is subject to the lim-
itations of SMS messaging. These limitations include delayed messages and lack of guaranteed delivery.
NOTE: SMS Command and Control (Sections [601] - [618] will only process messages from the mobile telephone numbers pro-
grammed in this Section if SMS Command and Control is enabled [301][ 3] ON. SMS responses are listed in Sections [621] -
[630]. A blank telephone number is disabled.
SMS NOTIFICATION
[321] - [328] SMS Phone Number 1 - 8 Toggle Options
The toggles in this Section determine the type of event message that will be sent to the SMS number programmed in
Sections [311] - [318].
[1] SMS Notification Alarm/Restore Default (OFF).
[2] SMS Notification Tamper/Restore Default (OFF).
[3] SMS Notification Opening/Closing Default (OFF).
[4] SMS Notification System Maintenance Default (OFF).
[5] SMS Notification System Test Default (OFF).
[6] SMS Notification Internal Events Default (OFF).
[7] SMS Notification Enabled Default (OFF).
[8] SMS Command and Control Enabled Default (ON).
NOTE: Each telephone number can be programmed to receive different event notifications. When more than 1 number receives the
event, the system will send the message to phone number 1 first. Only 1 send attempt is made for each programmed number.
Notification, for each programmed telephone number can be enabled/disabled with Toggle Option [7].
AREA LABEL PROGRAMMING
Each Area label is up to 32 ASCII characters, including spaces. The label language is specified in Section [009].
[351] Account Label
Default (Security System);
The Account Label is up to 32 ASCII characters. It is sent at the beginning of every SMS message originating from the Communicator
module.This label is used to identify the system to the recipient of the SMS message.
[352] System Label
Default (System Area);
The System Label is up to 32 ASCII characters. It is used for notification messages that apply to the system.
NOTE: On single partition systems the System Label may be used for all messages.
[353] - [360] Partition 1- 8 Label
Default (Partition x);
Where x is a partition number from 1 - 8. Partition Labels are up to 32 ASCII characters. Labels are used for SMS notification messages
that apply to a specific partition on the system.
USER LABEL PROGRAMMING
[361] - [400] User 1 - 40 Label
Default (User x);
Where x is the User number from 1 - 40. User labels are used to identify a User for SMS notification messages that apply to a specific
user. There are 40 programmable User Labels. Each label is up to 16 ASCII characters. The label language is specified in Section [009].
Table 14: Event Notification Language
Language Default Language Default Language Default Language Default
English OFF Czech ON Greek ON Latvian OFF
Spanish OFF Finnish OFF Turkish OFF Lithuanian OFF
Portuguese OFF German OFF Croatian ON Ukrainian ON
French OFF Swedish OFF Hungarian ON Slovakian OFF
Italian OFF Norwegian OFF Romanian OFF Serbian ON
Dutch OFF Danish OFF Russian ON Estonian OFF
Polish ON Hebrew ON Bulgarian ON Slovenian OFF
29008218R001_NOVA_TL255GS_GS2055_V.2.5X_IM_ENG_NA_UL_ULC_FCC_IC_dft_03