User's Manual

17
3. Perform a System Test by following the steps in the previous section.
4. Press [
][6][Master Code][8] to initiate the Walk Test.
5. To test the zones, activate each detector in turn (e.g., open each door/window or walk in
motion detector areas).
The System will display the following message when each zone (detector) is activated: "Secure
System Before Arming < >", or "Secure or Arm System". Use the [<][>] buttons to view which
zones are open. The message will disappear when the zones are closed.
Allowing Computer Access to your System
Occasionally, your installer may need to send information to or retrieve information from your
security system. Your installer will do this by having a computer call your system. You may need
to prepare your system to receive this ‘downloading" call. To do this:
Press [
][6][Master Code][5] at the keypad. This allows downloading for a limited period of
time. During this time, the system will answer incoming downloading calls. For more information
on this feature, please ask your installer.
DRAFT