User's Manual

13
Late to Open
This feature allows a user to be notified if their alarm system is not disarmed by a programmed
time of day.
NOTE: The Late to Open feature requires the monitoring station to forward calls to the user. Verify
with the installer whether this function is active.
[9] Late to Open Enable/Disable
The
Late to Open feature
enables or disables the Late to Open time programmed in [0].
It is typically used to track children after school. For example, if the parents get home from work
at 5pm, and a child gets home at 4 p.m. The programmable timer could be set for 4:15 p.m. If
the system is not disarmed at this time an alert would be sent to the monitoring station.
The keypad will display "Late to Open is Enabled" and sound 3 beeps if [9] is pressed within
the User Functions menu when this feature is off. The LCD keypad will display "Late to Open
is Disabled" and sound an error tone if [9] is pressed within the User Functions menu when this
feature is on.
[0] Late to Open Time of Day
This function is used to program the time setting enabled in [9]. This function programs the
"Late to Open" time of day for all 7 days of the week.
Valid entries for these sections are 00:00 – 23:59.
Entering 99:99 will disable the Late to Open feature for the current day.
After entering [
][6][Master Code][0], beeps will be sounded and "Press () for < > Sunday"
will be displayed on the keypad.
Pressing the right scroll [>] button displays the days of the week, from Sunday to Saturday.
While in the Late to Open menu, entering keys 1-7 will also select each day from Sunday to
Saturday, respectively.
•If [
] is pressed to select a day of the week, no beeps will be sounded and the keypad will dis-
play "Set 24hr Time" "Enter HH:MM 9999". If [#] is pressed from this menu, the user will be
returned to the previous Late to Open menu.
If the Alarm System is armed in any mode when the late to open time matches the time of day,
Late to Open will be logged to the event buffer and communicated to the monitoring station.
DRAFT