User's Manual
12
3. The keypad will display the event number and the time and date. Press [] to switch
between this information and the event details.
4. Use the [<][>] buttons to scroll through the events in the buffer.
5. To exit event buffer viewing, press [#].
Changing SMS Phone Numbers
This section tells you how to program your SMS phone numbers:
1. Enter [
][6][Master Code] to enter the Master User Functions of the system.
2. Use the [<][>] buttons to scroll to the SMS programming prompt.
3. Press [
] to select the SMS phone numbers or to see your GSM phone number. The following
message is displayed:
• To see your GSM phone number use the [<][>] buttons to scroll to the following message.
Then press
[] to view the number.
4. Press to select Phone No. 1. The following 26-digit phone number screen is shown.
5. Program a new phone number or delete an existing phone number as follows:
• To Enter a new telephone number (e.g., 4168889999), enter your numbers starting at
the first F (after the D), see below.
• To Delete an existing phone number, replace the letter D with an F by pressing [
][6][]
and then press # to exit. This will delete the phone number.
6. Use the [<][>] buttons to scroll to another Phone No. to be programmed.
7. Repeat from Step 4 to enter more phone numbers. To exit the process at anytime, press [#].
Select Option <>
SMS Programming
Press (
) for <>
Phone No.1 P
“P” denotes whether the phone number has been
programmed.
Press () for <>
GSM Phone No.
Pressing (
) here shows your GSM number.
DFFFFFFFFFFFFFFF
FFFFFFFFFFFFPH#X
X=1 to 8 to indicate the phone number screen
being programmed.
(e.g., X=1 for Phone No. 1)
D4168889999FFFFF
FFFFFFFFFFFFPH#1
Do Not delete the remaining F’s.
F4168889999FFFFF
FFFFFFFFFFFFPH#1
,
DRAFT