Manualshelf

User's Manual

ManualsBrandsDigital Security Controls ManualsElectronicsWireless Security System
11121314151617181920
10
Proximity Tag Enrollment (PT4/PT8)
Proximity (prox) tag readers are only available on WT5500P keypads. Refer to the label on top
of the keypad to confirm which model you have.
Enrolling Proximity Tags
1. Enter [
][5][Master Code] to enter User Code Programming.
2. Scroll to the desired user code (01-16, or 40 for the master code) then press [
].
3. Enter your desired 4 or 6-digit user access code. The following message will be displayed
after the user access code is entered:
4. Place the prox tag near the tag reader ( ) at the left side of the display to assign it to the
user code. The following message will be displayed:
5. If an attempt is made to assign a prox tag to an existing user code that has an associated
prox tag, the following message will be displayed.
Select another user code or erase the existing user code and associated prox tag and re-enroll
with the new prox tag. Return to Step 2 for instructions on how to enroll a user code.
NOTE: To exit the process at anytime, press [#].
Erasing a User Code/Proximity Tag
Enter [
][5][Master Code], select the desired user code. Enter [] to erase the code and asso-
ciated prox tag. The keypad will display the user number (e.g., 01) with a letter “P” if a user
code has already been programmed and a letter “T” if a code and prox tag have been pro-
grammed.
NOTE: User 40 for the master code cannot be deleted; an attempt to delete this user code will
delete the prox tag only. The prox tag must be re-enrolled before it can be used again.
Proximity Tag Operation
6. Place the prox tag near the tag reader
() at the left side of the display to arm/disarm your
system. When arming the system, the following message will be displayed:
7. When disarming the system, the following message will be displayed:
8. If there is an attempt to swipe a prox tag that has not been enrolled, an error tone will sound
and the following message will be displayed:
Return to Step1 for instructions on how to enroll the prox tag.
WARNING: KEEP THE PROXIMITY TAG OUT OF REACH OF SMALL CHILDREN.
THE MATERIALS ASSOCIATED WITH THIS PRODUCT (LITHIUM BATTERIES, ETC.) MUST BE RECY-
CLED ACCORDING TO LOCAL RULES AND REGULATIONS.
Present Tag or
Press # to Exit
Tag Enrolled
Successfully
Duplicate
Tag/User Code
Exit Delay in
Progress
System Disarmed
Invalid Tag
DRAFT