User's Manual

FCC Compliance Statement

CAUTION: Changes or modifications not expressly approved by the manufacturer could void your authority to

use this equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

- Re-orient the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/television technician for help.

The user may find the following booklet prepared by the FCC useful: ‘How to Identify and Resolve Radio/

Television Interference Problems’. This booklet is available from the U.S. Government Printing Office,

Washington D.C. 20402, Stock # 004-000-00345-4.

INDUSTRY CANADA Compliance Statement

IC: 160A-IT410

The term “IC:” before the radio certification number only signifies that Indsustry Canada technical specifications were met.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appariel numérique de la classe B est conforme à la norm NMB-003 du Canada.

Toronto, Canada · www.dsc.com

Tech Support / Centre d’aide technique / Líneas Tech: 1-800-387-3630 (CA, US), 905-760-3036

Printed in Canada / Imprime au Canada / Impreso en Canadá

Table 1: IT- 410 Ratings

CHARACTERISTICS

Environment: Indoor use only.

Humidity: 0% ~ 85% Relative Humidity (non condensing)

Operating Temperature: 32º F ~ 104º F (0º C ~ 40º C)

Dimensions (inches): 5.75 (146 mm) x 4.15 (105 mm) x 0.98 (25 mm)

Weight (ounces): 5 (140 g)

Tabla 1: Valores nominales IT- 410

ESPECIFICACIONES

Ambientales Uso de interior solamente.

Humidity: 0% ~ 85% de humedad relativa sin condensación

Temperatura de functionamiento: 32º F ~ 104º F (0º C ~ 40º C)

Dimensiones del panel (pulgades): 5.75 (146 mm) x 4.15 (105 mm) x 0.98 (25 mm)

Peso (onze): 5 (140 g)

Tableau 1: Valeurs nominates IT- 410

CHARACTERISTIQUES

Environnement: Utilisation d’intérieur seulement.

Humidité: 0% ~ 85% RH sans condensation

Température d’utilisation: 32º F ~ 104º F (0º C ~ 40º C)

Dimensions de la carte (pouces): 5.75 (146 mm) x 4.15 (105 mm) x 0.98 (25 mm)

Poids (once): 5 (140 g)