WT5500 Installation Instructions English Enter Code to Arm System <> 1 2 3 4 5 6 7 8 9 * 0 # WARNING: Please refer to the System Installation Manual for information on limitations regarding product use and function, and information on the limitations as to liability of the manufacturer. NOTE: These instructions are to be used in conjunction with the appropriate Control Panel Installation Manual, with which this equipment is intended to be used.
PROXIMITY TAGS ONLY •1 PT4 (433MHz proximity tag) or PT8 (868MHz proximity tag) •1 Installation manual English Installation Instructions Unpacking WT5500 - STANDARD WT5500P - PROXIMITY •1 WT5500 keypad •1 WT5500BRK wall bracket •1 Installation manual •1 Inner door sticker •4 AA batteries •1 Hardware pack •1 WT5500P keypad •1 WT5500BRK wall bracket •1 Installation manual •1 Inner door sticker •4 AA batteries •1 Hardware pack •1 PT4 (433MHz proximity tag) or PT8 (868MHz proximity tag) WT5500D - COMPLE
2. Enter keypad programming by pressing 4 > 8 > Installer Code > 4. 3. Enter Section 998 at the keypad that was programmed. The keypad will now broadcast the label programming to the PC9155. The PC9155 will then program the labels in others WT5500 keypads that have been enrolled by way of the RF link. NOTE: This operation may take several minutes. 4. When the keypad is finished press the # key to exit. NOTE: Label broadcast from this keypad is only compatible with other WT5500 keypads.
Limited Warranty Digital Security Controls warrants that for a period of 12 months from the date of purchase, the product shall be free of defects in materials and workmanship under normal use and that in fulfilment of any breach of such warranty, Digital Security Controls shall, at its option, repair or replace the defective equipment upon return of the equipment to its repair depot.
[5] Function Key 5 Assignment 00 to 32 16 Quick Exit I_____I_____I Keypad Function Keys Please see your system installation manual for a complete list of all the function key options available for your system.
ON ON OFF ON OFF ON OFF OFF 1 2 3 4 5 6 7 8 I____I I____I I____I I____I I____I I____I I____I I____I Chime Enabled for Zone Openings Chime Enabled for Zone Closings Late to Open Prompts ON For Future Use For Future Use Power Save Mode ON For Future Use For Future Use Chime Disabled for Zone Openings Chime Disabled for Zone Closings Late to Open Prompts OFF For Future Use For Future Use Power Save Mode OFF For Future Use For Future Use [121] Partition 1 Command Output #2 Default: ‘Command_O/P_2’ Section
You, and You have no right to use it. SOFTWARE PRODUCT LICENSE The SOFTWARE PRODUCT is protected by copyright laws and international copyright treaties, as well as other intellectual property laws and treaties. The SOFTWARE PRODUCT is licensed, not sold. 1. GRANT OF LICENSE. This EULA grants You the following rights: (a) Software Installation and Use - For each license You acquire, You may have only one copy of the SOFTWARE PRODUCT installed.
ALL OTHER OBLIGATIONS OR LIABILITIES ON THE PART OF DSC. DSC MAKES NO OTHER WARRANTIES. DSC NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON PURPORTING TO ACT ON ITS BEHALF TO MODIFY OR TO CHANGE THIS WARRANTY, NOR TO ASSUME FOR IT ANY OTHER WARRANTY OR LIABILITY CONCERNING THIS SOFTWARE PRODUCT.
