User's Manual

2
Keypad Controls & Indicators
IMPORTANT NOTICE
A security system cannot prevent emergencies. It is only intended to alert you and – if included –
your central station of an emergency situation. Security systems are generally very reliable but
they may not work under all conditions and they are not a substitute for prudent security prac-
tices or life and property insurance. Your security system should be installed and serviced by
qualified security professionals who should instruct you on the level of protection that has been
provided and on system operations.
Language Selection
Your system can display messages in different languages.
1. Press and hold both buttons simultaneously.
2. Using the buttons, scroll through the available languages.
3. Press to select your desired language.
Arming & Disarming the System
Stay Arming
Stay arming will bypass the interior protection (i.e. motion sensors) and arm the perimeter of the
system (i.e. doors and windows). Close all sensors (i.e. stop motion and close doors). The
Ready ( ) indicator should be on.
Press and hold the Stay button until it beeps (approx. 2 seconds) and/or enter your Access
Code and do not leave the premises. During the setting state (exit delay active), the Armed ( )
and Ready ( ) indicators will light.
When the exit delay is completed, the alarm system is armed/set and this is indicated on the
keypad as follows: the Ready ( ) indicator will turn off, the Armed ( ) indicator will remain on.
The Armed ( ) indicator and a bypass message will be displayed. The system will automati-
cally bypass certain interior sensors (i.e. motion sensors).
NOTE: For SIA FAR listed panels, the Stay Arming Exit Delay will be twice as long as the Away
Arming Exit Delay.
NOTE: If your system is installed in accordance with SIA CP-01 Standard for False Alarm
Reduction then the security system will arm in the Stay Armed mode if the exit delay time expires
and no exit has been made.
Night Arming
To fully arm the system when it has been armed in Stay Mode, press at the keypad. All
interior zones will now be armed except for devices programmed as Night Zones.
NOTE: Your installer can also program a function key on the keypad to allow you to arm the
system in Night Mode. This would allow Night Arming to be activated by holding down a function
key for 2 seconds.
Night zones are only armed in Away mode, this permits limited movement within the premises
when the system is fully armed. Ensure that your installer has provided you with a list identifying
zones programmed as night zones.
1
23
4
5
6
7
8
0
#
9
*
Enter Code to
Arm System
<>
Stay
Function Keys
LED Indicators
Ready
Armed
Trouble
Power
Away
Chime
Bypass
Quick
Exit
Scroll Keys
Backlighting
Sensor
LCD
Prox Tag Detector
(if available)
Emergency Keys
Fire
Auxiliary
Panic
< > indicates user can
scroll through options
9033

