User's Manual

Display Icons

Buzzer

Provides an audible confirmation of a pressed button or that a command to the panel has been

executed.

Keylock Mode

Ensures that the system is not accidently armed or disarmed with the wireless key.

To lock the keys:

1. Press and hold the Status button.

2. After 1 second, the wireless key will beep to indicate transmission.

3. After 3 seconds, the wireless key will beep again and flash the embedded icon to indicate

keys are locked.

To unlock the keys:

1. Press and hold the Status button for 3 seconds.

2. Press and hold the Panic button for 3 seconds.

3. Press and hold the Stay and Away buttons OR the Disarm and Panic buttons simultaneously

for 3 seconds.

Upon exiting Key Lock mode, the status will be automatically displayed.

Testing Your System

NOTE: Inform your Monitoring Station when you begin and end System Testing.

All smoke detectors in this installation must be tested by your smoke detector installer or dealer

once a year to ensure they are functioning correctly. It is the user’s responsibility to test the sys-

tem weekly (excluding smoke detectors). Ensure you follow all the steps in the two tests below.

NOTE: Should the system fail to function properly, call your installation company for service

immediately.

Sounder and Display Test

This test activates all display pixels and indicator lights and does a four second check of the

sounder.

1. Press [Master Code] .

The following will occur:

- The system activates the Bell output on medium volume for 2 seconds followed by full volume

alarm for 2 seconds. All display lights and LCD pixels will turn on.

- The Ready, Armed, Trouble and Power LED’s will flash for the duration of the test.

2. To exit the function menu, press .

Sends a Panic code to the central station. If pressed simultaneously with the Disarm

button will activate Command #2 Output (if programmed).

Request System Status (see display).

Indicates the key is transmitting or waiting for a response.

Indicates system is armed (all modes).

Indicates system is Stay or Night armed.

Indicates system is Night armed.

Indicates system is disarmed.

Indicates low battery. Contact service personnel for replacement.

Indicates that there are alarms in memory.

Indicates system trouble or that buttons on the wireless key are locked.

