Manualshelf

User's Manual

ManualsBrandsDigital Security Controls ManualsElectronicsOutdoor dual PIR & MW detector
891011121314151617
14
9 Operation
Note! Connect the LC-171 to a positive Voltage output of 9.6 -16VDC source.
Use only a listed power limited source.
The detector shall be provided with minimum of 4 hours of standby power from either a
listed compatible control unit or power supply.
The detector begins a 2 minute warm up period once connected to power.
The LED will flash for the first 30 seconds of the warm up period after power up. The device
is operational once the LED stops flashing
The warm up period will continue for 90 seconds after the LED stops flashing
Once the warm up period is complete the device is ready for use