User's Manual

ManualsBrandsDigital Security Controls ManualsElectronicsGSM Alarm Communicator

INTRODUCTION

The GS3060 is a backup wireless communicator that sends alarm system information to a System III

or System II receiver through a GSM/GPRS wireless network.

Features

• Compatible with any listed panel that supports a 4 or 10-digit Contact ID

• Simulates land line

• Switches automatically to GSM network in the event land line trouble (line down)

• GSM Signal Indicator

• 4 programmable outputs

• Houses 12V - 1.2 Ah battery

• Case Tamper Output

• Land-line Overvoltage Protection

• Dual-Band GSM Radio

• 4 input lines

• GPRS/Internet communication with Sur-Gard System III / II

• PTM Feature 4 phone numbers programmable for Contact ID Dialer

Technical Specifications

The input voltage to the GS3060

can be drawn from the Control Panel or provided by an external UL

Listed power supply rated for the application (external power-limited source).

Ratings

Power Supply RatingsPower Supply Ratings

Power Supply Ratings

Input Voltage: ............................................................................................ 9 - 14V

DC (13.8VDC typical)

Current: .............................. 120mA* (JP3 - OFF and internal battery required) or 500mA* (JP3 ON)

* Plus any current drawn from the GS3060 AUX+ terminal

Battery: ......................................................................... sealed, rechargeable type, rated 12V/1.2Ah

Recharging current: ................................................................................................................... 50mA

CurCur

Cur

ent consumptionent consumption

ent consumption

Standby current: ...................................................................................................................... 120mA

Alarm (Transmitting) current: ................................................................................................... 450mA

PGM outputs: ....................................................................................... 4, open collector, rated 50mA

Operating frequency: ................................................................................................... 850/1900MHz

Antenna Gain: ............................................................................................................................ 1.5dB

EnvirEnvir

Envir

onmental specificationsonmental specifications

onmental specifications

Operating temperature: .................................................................................. 0°C-49°C (32°F-120°F)

Humidity: ................................................................................. 93%RH Maximum (Non-Condensing)

Mechanical specificationsMechanical specifications

Mechanical specifications

Metal enclosure, painted; dimensions: ...................... 138mm x 224mm x 55mm / 5.4” x 8.8” x 2.2”

Weight (without battery): ................................................................................................. 900g / 3.2 oz

Internal Event Buffer (communications): ................................................... 256 Events (not viewable)

Maximum loop resistance of line between the device connected in series on T1/R1: ........... 1Kohm

This equipment GS3060 is fixed and shall be installed by Service Persons only (Service Person is defined as a person

having the appropriate technical training and experience necessary to be aware of hazards to which that person may

be exposed in performing a task and of measures to minimize the risks to that person or other persons). It shall be

installed and used within an environment that provides the pollution degree max 2, over voltages category II, in non-

hazardous, indoor locations only. This manual shall be used with the Installation Manual of the alarm control panel.

All instructions specified within that manual must be observed.