Installation Manual

15
[05] PGM2 Definition
[06] Skyroute Configuration Options
[07] Home SID Number
[10] Skyroute Test Time
[11] Test Transmission Day Mask - This section is not to be used for UL Listed applications.
[13] Skyroute Test Rates
[18] Backup FTC Options
[19] Backup Reporting Mode Timer
[20] Communication Mode
This section will display the mode in which the Skyroute operates. To change the mode refer to section [99].
00 - Skyroute module is in Full Reporting Mode
11 - Skyroute module is in Generic Reporting with fall-back
to Full Reporting if TLM or FTC trouble occurs
12 - Skyroute module is in Generic Reporting Mode
03 - Skyroute module is in Backup Reporting Mode
00 I___I___I 04 = 2 Wire Smoke, 23 = silent 24 Hour Input, 24 = Audible 24 Hour Input.
Default Option ON Option OFF
OFF I___I Option 1 ‘A’ Channel Selected ‘A’ Channel Not Selected
ON I___I Option 2 ‘B’ Channel Selected ‘B’ Channel Not Selected
OFF I___I Option 3 Home System Only Not in Home System Operation
OFF I___I Option 4 Unit Active with Connect 24 Unit Not Active with Connect 24
OFF I___I Options 5 to 8 System Use - DO NOT CHANGE
0000 I___I___I___I___I This is the SID (in Hex) of the cellular service that is available on the current channel.
This section should be programmed ONLY if option 3 is turned ON in section [06].
9999 I___I___I___I___I 0000-2359 (in 24 hour time)
Default Option ON Option OFF
OFF I___I Option 1 Test on Sunday Disabled
OFF I___I Option 2 Test on Monday Disabled
OFF I___I Option 3 Test on Tuesday Disabled
OFF I___I Option 4 Test on Wednesday Disabled
OFF I___I Option 5 Test on Thursday Disabled
OFF I___I Option 6 Test on Friday Disabled
OFF I___I Option 7 Test on Saturday Disabled
OFF I___I Option 8 For Future Use
Default Option ON Option OFF
OFF I___I Option 1 Not used
OFF I___I Option 2* Daily Test Disabled
ON I___I Option 3 Weekly Test Disabled
OFF I___I Option 4 Keybus Tests Enabled Disabled
OFF I___I Options 5 to 8 For Future Use
* Option 2 must be ON for UL Listed applications.
Default Option ON Option OFF
ON I___I Option 1 FTC Phone #1 Backup Disabled
ON I___I Option 2 FTC Phone #2 Backup Disabled
OFF I___I Option 3* T-LINK Comm Fault Backup Disabled
OFF I___I Option 4* T-LINK Receiver Trb Backup Disabled
OFF I___I Options 5 to 8
* Options 3 and 4 may be used for Generic Reporting with Fall Back to full reporting mode if a T-Link is
the main communicator for the panel.
Default
42 I___I___I (number x 10 seconds in Hex)