Installation Manual

Standard Connection with PC5020CF / Partner P-8+CF (Commercial Fire Applications)

Skyroute

Keybus

Skyroute

place

Wiring Skyroute to a DSC PC5020CF/P-8+CF

NOTE: For commercial

Fire Applications DO NOT

connect any devices on

the "BELL+" terminal

(PC5020CF) other than the

Skyroute module.

CONTROL PANEL

KEYBUS TO ALL MODULES

Refer to the Installation Manual for

detailed information on wiring.

WARNING!

All connections to the Skyroute module are power limited. Do not route any wiring over the circuit

boards. Maintain at least 1” (25.4mm) separation between circuit board and wiring.

A minimum of 1/4” (7mm) separation must be maintained at all points between non power limited

wiring and power limited wiring.

Refer to your control panel Installation Manual for any additional information.

REDBELL

AUX

–

BLK YEL GRN Z1 Z3 Z5 Z7COM

COM

COM COMZ2 Z4 Z6 Z8 RING TIP R-1

T- 1

EGNDPGM

1324

RED BLK

PC-Link Connection

Supervised

PTC