User's Manual
Table Of Contents
- Table of Contents
- 1 Introduction
- 2 Installation, Testing & Factory Defaults
- 3 Controls and Indicators
- 4 Power up Sequence
- 5 System Programming
- 6 Programming Descriptions
- 7 Programming Worksheets
- Glossary of Terms
- Skyroute CL3050 Quick Start:
- Note: Before you start, you must be enrolled with CONNECT 24 as an authorized installer to activa...
- STEP 1 - SELECT BEST LOCATION (See Section 2.1)
- Connect the Skyroute transceiver to a 7 Ah battery, as described in Section 2.1. Determine the be...
- STEP 2 - CONNECT NECESSARY WIRING (See Section 6)
- Mount the Skyroute, determine the desired mode of operation and connect the appropriate control p...
- STEP 3 - PROGRAM (See Section 5)
- If the default programming must be changed, connect a PowerSeries keypad as shown in Section 5 an...
- STEP 4 - ACTIVATE (See Section 2.1)
- Call the Connect 24 Voice Response Unit (VRU) at the toll free number provided with your Dealer C...
- STEP 5 - TEST (See Section 2.2)
- Once activated, send two signals to your central station to confirm proper operation.
- YOUR SKYROUTE INSTALLATION IS NOW COMPLETE.
- ALL OTHER PROGRAMMING SECTIONS IN THIS MANUAL ARE OPTIONAL.
- Appendix A: Reporting Codes
Skyroute CL3050 Standalone Wireless Communicator
2
1.1 Specifications
• Power Supply
Voltage...................................................................................... 9-12 V
AC
or V
DC
Current.........................................................................................500 mA (Max)
Low DC Trouble ...................................................................................... 8.8 V
DC
Low DC Restore ...................................................................................... 9.0 V
DC
Low AC Trouble ...................................................................................... 7.5 V
AC
Low AC Restore ...................................................................................... 8.0 V
AC
• Current Drain
Standby ................................................................................................. 100 mA
Receiving ............................................................................................... 150 mA
Transmitting........................................................................................... 850 mA
• RF Power Output .......................................................................................... 600 mW
• Battery
Charging Voltage.................................................................................. 6.87 V
DC
Low Battery Restore..............................................................................5.87 V
DC
Low Battery Trouble ..............................................................................5.72 V
DC
Critical Shutdown ................................................................................... 5.0 V
DC
• Operating Modes
Bell Follower
2-24Hr Zones
8-24Hr zones (with PC5108)
• Event Buffer (communications)............................................. 32 Events (not viewable)
• Dimensions ...................................................................................5 1/8” x 7 3/4” x 2”
• Weight ............................................................................................... 0.5 lbs. (0.2Kg)
• EEPROM Memory
• Programmable by all PowerSeries Keypads
PC5508/KP5508Z ................................................................. 8 Zone LED keypad
PC5516Z/KP5516Z ............................................................. 16 Zone LED keypad
PC5532Z/KP5532Z ............................................................. 32 Zone LED keypad
LCD5500Z/KPL5500Z ................................ Programmable Message LCD Keypad
LCD5501Z/KP5501Z .................................................Fixed Message LCD Keypad
1.2 Unpacking
Verify that the following items have been included.
1 Skyroute CL3050 (rechargeable battery included)
1 Installation & Programming Guide
1 Antenna
4 Mounting screws
45.6 k
Ω
resistors
Remove antenna from protective bubble pack and install in unit.
Caution:
Install antenna before connecting battery or power leads to this unit.
Transmission without an antenna can cause permanent damage.
Caution:
When removing cover of this unit
DO NOT
touch or handle exposed
electrical devices and components. Electrostatic discharge (ESD) can
permanently damage this unit or reduce the reliability and life expect-
ancy of components.