User's Manual
Table Of Contents
- Table of Contents
- 1 Introduction
- 2 Installation, Testing & Factory Defaults
- 3 Controls and Indicators
- 4 Power up Sequence
- 5 System Programming
- 6 Programming Descriptions
- 7 Programming Worksheets
- Glossary of Terms
- Skyroute CL3050 Quick Start:
- Note: Before you start, you must be enrolled with CONNECT 24 as an authorized installer to activa...
- STEP 1 - SELECT BEST LOCATION (See Section 2.1)
- Connect the Skyroute transceiver to a 7 Ah battery, as described in Section 2.1. Determine the be...
- STEP 2 - CONNECT NECESSARY WIRING (See Section 6)
- Mount the Skyroute, determine the desired mode of operation and connect the appropriate control p...
- STEP 3 - PROGRAM (See Section 5)
- If the default programming must be changed, connect a PowerSeries keypad as shown in Section 5 an...
- STEP 4 - ACTIVATE (See Section 2.1)
- Call the Connect 24 Voice Response Unit (VRU) at the toll free number provided with your Dealer C...
- STEP 5 - TEST (See Section 2.2)
- Once activated, send two signals to your central station to confirm proper operation.
- YOUR SKYROUTE INSTALLATION IS NOW COMPLETE.
- ALL OTHER PROGRAMMING SECTIONS IN THIS MANUAL ARE OPTIONAL.
- Appendix A: Reporting Codes
i
Table of Contents
Section 1: Introduction ...................................................................... 1
1.1
Specifications.......................................................................................................2
1.2
Unpacking ...........................................................................................................2
Section 2: Installation, Testing & Factory Defaults.......................... 3
2.1
Installation ...........................................................................................................3
2.2
Testing .................................................................................................................4
2.3
Resetting to Factory Defaults................................................................................4
Section 3: Controls & Indicators........................................................ 5
3.1
LED Indicators ......................................................................................................5
3.2
Enroll Button........................................................................................................6
3.3
Terminal Connections...........................................................................................6
Section 4: Power up Sequence.......................................................... 7
Section 5: System Programming....................................................... 8
Section 6: Programming Descriptions .............................................. 9
[01]
Zone 1-2 Definitions ............................................................................................9
[02]
Zone 3-8 Definitions ............................................................................................9
[03]
Zone 1-2 Loop Response......................................................................................9
[10]
Skyroute CL3050 Mode of Operation...................................................................9
[11]
Skyroute CL3050 Configuration Options 1 .........................................................10
[12]
Skyroute CL3050 Configuration Options 2 .........................................................11
[13]
Skyroute CL3050 Trouble Output Mask ..............................................................11
[15]
System Time ......................................................................................................13
[16]
System Day ........................................................................................................13
[17]
Test Transmission Time .......................................................................................13
[18]
Test Transmission Day.........................................................................................13
[20]
Transmission Options .........................................................................................13
[21]
System Event Communication Options...............................................................15
[22]
Input Supply Fail Tx Delay...................................................................................15
[23]
Generic Zone Reporting Timer............................................................................15
Section 7: Programming Worksheets ............................................. 16
Glossary of Terms............................................................................. 19
Appendix A ...................................................................................... 20