User's Manual
Table Of Contents
- Table of Contents
- 1 Introduction
- 2 Installation, Testing & Factory Defaults
- 3 Controls and Indicators
- 4 Power up Sequence
- 5 System Programming
- 6 Programming Descriptions
- 7 Programming Worksheets
- Glossary of Terms
- Skyroute CL3050 Quick Start:
- Note: Before you start, you must be enrolled with CONNECT 24 as an authorized installer to activa...
- STEP 1 - SELECT BEST LOCATION (See Section 2.1)
- Connect the Skyroute transceiver to a 7 Ah battery, as described in Section 2.1. Determine the be...
- STEP 2 - CONNECT NECESSARY WIRING (See Section 6)
- Mount the Skyroute, determine the desired mode of operation and connect the appropriate control p...
- STEP 3 - PROGRAM (See Section 5)
- If the default programming must be changed, connect a PowerSeries keypad as shown in Section 5 an...
- STEP 4 - ACTIVATE (See Section 2.1)
- Call the Connect 24 Voice Response Unit (VRU) at the toll free number provided with your Dealer C...
- STEP 5 - TEST (See Section 2.2)
- Once activated, send two signals to your central station to confirm proper operation.
- YOUR SKYROUTE INSTALLATION IS NOW COMPLETE.
- ALL OTHER PROGRAMMING SECTIONS IN THIS MANUAL ARE OPTIONAL.
- Appendix A: Reporting Codes
7 Programming Worksheets
18
[20] Transmission Options
Default Opt Option On Option Off
ON
I___I
1
Zone Alarms Disabled
OFF
I___I
2
Zone Alarm Restores Disabled
OFF
I___I
3
Zone Fault Disabled
OFF
I___I
4
Zone Fault Restores Disabled
OFF
I___I
5
Zone Tamper Disabled
OFF
I___I
6
Zone Tamper Restores Disabled
ON
I___I
7
System Maintenance Events Disabled
ON
I___I
8
Generic Zone Reporting Detailed Zone Reporting
[21] System Event Communication Options
Default Opt Option On Option Off
ON
I___I
1
Input Supply Failure Disabled
ON
I___I
2
Low Battery Disabled
OFF
I___I
3
Skyroute CL3050 Tamper Disabled
OFF
I___I
4
PC5108 Module Fault Disabled
OFF
I___I
5
PC5108 Tamper Disabled
OFF
I___I
6-8
For Future Use
[22] Input Supply Fail TX Delay
Default Range
0700
I___I___I___I___I 0000-2359 Hrs/Mins