User's Manual
Table Of Contents
- Table of Contents
- 1 Introduction
- 2 Installation, Testing & Factory Defaults
- 3 Controls and Indicators
- 4 Power up Sequence
- 5 System Programming
- 6 Programming Descriptions
- 7 Programming Worksheets
- Glossary of Terms
- Skyroute CL3050 Quick Start:
- Note: Before you start, you must be enrolled with CONNECT 24 as an authorized installer to activa...
- STEP 1 - SELECT BEST LOCATION (See Section 2.1)
- Connect the Skyroute transceiver to a 7 Ah battery, as described in Section 2.1. Determine the be...
- STEP 2 - CONNECT NECESSARY WIRING (See Section 6)
- Mount the Skyroute, determine the desired mode of operation and connect the appropriate control p...
- STEP 3 - PROGRAM (See Section 5)
- If the default programming must be changed, connect a PowerSeries keypad as shown in Section 5 an...
- STEP 4 - ACTIVATE (See Section 2.1)
- Call the Connect 24 Voice Response Unit (VRU) at the toll free number provided with your Dealer C...
- STEP 5 - TEST (See Section 2.2)
- Once activated, send two signals to your central station to confirm proper operation.
- YOUR SKYROUTE INSTALLATION IS NOW COMPLETE.
- ALL OTHER PROGRAMMING SECTIONS IN THIS MANUAL ARE OPTIONAL.
- Appendix A: Reporting Codes
Skyroute CL3050 Standalone Wireless Communicator
16
7 Programming Worksheets
Zone Definitions (For Sections [01] -[02])
00 Null Zone (Not Used)
01 Burglary
02 Fire
03 Panic
04 Technical
05 Gas
06 Heat
07 Medical
08 Emergency
09 Water
10 Freeze
11 Sprinkler
12 Hold-up
13 TLM Monitor (1 zone max.)
[01] Zone 1-2 Definitions
Default Default
01
I___I___I Zone 1
01
I___I___I Zone 2
[02] Zone 3-8 Definitions
Default Default
01
I___I___I Zone 3
01
I___I___I Zone 4
01
I___I___I Zone 5
01
I___I___I Zone 6
01
I___I___I Zone 7
01
I___I___I Zone 8
[03] Zone 1-2 Loop Response
01-FF (Hex 0.1 second increments), mode 2 only
Default Default
05
I___I___I Zone 1
05
I___I___I Zone 2
[10] Skyroute CL3050 Mode of Operation
Default
01
I___I___I
01
- Bell Follower,
02
- 2 Zone,
03
- 8 zone (PC5108 )
[11] Skyroute CL3050 Configuration Options 1
Default Opt Option On Option Off
OFF
I___I
1
A Channel selected B Channel selected
ON
I___I
2
Normally Closed Loops End-of-Line Resistors
OFF
I___I
3
Double End-of-Line Resistors Single End-of-Line Resistors
OFF
I___I
4
Test Once a Day Enabled Disabled
ON
I___I
5
Test Once a Week Enabled Disabled
OFF
I___I
6
Enrolled with
Connect 24
Not Enrolled with
Connect 24
OFF
I___I
7 System Use
-
Caution:
Do not change
OFF
I___I
8 System Use -
Caution: Do not change
[12] Skyroute CL3050 Configuration Options 2
Default Opt Option On Option Off
ON
I___I 1 Swinger Shutdown Enabled Swinger Shutdown Disabled
ON
I___I 2-8 For Future Use