User's Manual

10
Testing & Mounting
S E C T I O N 5
5.1 Test the Reception of Wireless Keys
It is very important to test each wireless key. Following these steps will test the signal
strength between the PC5102-433 and the wireless key.
Testing Individual Wireless Keys
To ensure that the PC5102-433 receiver is receiving transmissions from these
devices, use the function keys on the WLS909-433/WLS919-433 at several different
points in the installation.
5.2 Mount the PC5102-433
When you have tested reception of the PC5102-433 with all the wireless devices (see
section 5.1) and you have a good mounting location, mount the PC5102:
1. Pull the Keybus wires through the hole at the bottom of the cabinet.
2. Mount the cabinet securely to the wall.
Now that your PC5102-433 and wireless devices are mounted and working properly,
read section 6 for information on potential wireless trouble conditions, and battery
replacement.