Manualshelf

User's Manual

ManualsBrandsDigital Security Controls ManualsElectronicsWireless Control receiver
12345678910
4
2.4 Connect the PC5102-433 Receiver
CAUTION:
Remove all power from the system while connecting modules to the Keybus
.
Connect the PC5102-433 to the four-wire Keybus of the control panel according to
the following diagram.
KEYBUS TO
PC5102
Control Panel
RED BLK YEL GRN
RED
BLK
YEL
GRN
After you have completed the wiring, reconnect the power to the security system.
Now
that you have wired the PC5102-433, you should enroll and program the wireless
keys. See Section 3 for instructions.
NOTE: Each control panel may either have a PC5102 or a PC5132 enrolled.
S E T U P & W I R I N G