User Manual

5.2 Mount the PC5132 and Wireless Devices

When you have tested reception of the PC5132 with all the wireless devices (see

section 5.1) and you have a good mounting location, mount the PC5132:

1. Pull the Keybus wires through the hole at the bottom of the cabinet.

2. Mount the cabinet securely to the wall.

Mount the Devices

If you have conducted the placement test described in section 5.1 and got 3

“Good” results in a row for each device, you can mount the wireless devices. See

the

Installation Sheet

for each device for mounting instructions.

Now that your PC5132 and wireless devices are mounted and working properly,

read section 6 for information on potential wireless trouble conditions, RF jamming

signals, and battery replacement.

T E S T I N G & M O U N T I N G