Installation Manual
Table Of Contents
- Table of Contents
- Introduction
- 1.1 How to use this Manual
- 1.2 Specifications and Features
- 1.3 Compatible Wireless Devices
- 1.4 Batteries
- PC5132 Set up & Wiring
- 2.1 Unpack the PC5132
- 2.2 Choose a Mounting Location for the PC5132
- 2.3 Antennas
- 2.4 Connect the PC5132 Receiver
- 3.1 A Note about Electronic Serial Numbers
- 3.2 Enrolling Wireless Devices (WLS904NB433, WLS907NB433)
- 3.3 Enroll & Program Wireless Keys (WLS909NB433) 5
- 3.4 Identified Wireless Keys
- Other Programming
- 4.1 Program Zones and Partitions
- 4.2 Enable PC5132 Supervision
- 4.3 Enable Supervision of Wireless Zones
- 4.4 Jamming Signal Detection
- 4.5 PC5132 Software Default
- 4.6 Deleting Wireless Devices
- Testing & Mounting
- 5.1 Test the Reception of Wireless Devices
- 5.2 Mount the PC5132 and Wireless Devices
- Additional Notes
- 6.1 Trouble Conditions
- 6.2 Jamming Signal Detection
- 6.3 Wireless Zone Low Battery Transmission
- Troubleshooting
- Programming Worksheets
- Index
Introduction 1
1.1 How to use this Manual ....................................................................................... 1
1.2 Specifications and Features ............................................................................... 1
1.3 Compatible Wireless Devices ............................................................................. 2
1.4 Batteries .............................................................................................................. 2
PC5132 Set up & Wiring 3
2.1 Unpack the PC5132 ............................................................................................ 3
2.2 Choose a Mounting Location for the PC5132 .................................................... 3
2.3 Antennas ............................................................................................................. 3
2.4 Connect the PC5132 Receiver ........................................................................... 3
Enrolling Wireless Devices 4
3.1 A Note about Electronic Serial Numbers ............................................................ 4
3.2 Enrolling Wireless Devices (WLS904NB433, WLS907NB433) .......................... 4
3.3 Enroll & Program Wireless Keys (WLS909NB433) ............................................. 5
3.4 Identified Wireless Keys ..................................................................................... 6
Other Programming 7
4.1 Program Zones and Partitions ............................................................................ 7
4.2 Enable PC5132 Supervision ............................................................................... 7
4.3 Enable Supervision of Wireless Zones ............................................................... 8
4.4 Jamming Signal Detection .................................................................................. 8
4.5 PC5132 Software Default .................................................................................... 9
4.6 Deleting Wireless Devices .................................................................................. 9
Testing & Mounting 10
5.1 Test the Reception of Wireless Devices ........................................................... 10
5.2 Mount the PC5132 and Wireless Devices ........................................................ 11
Additional Notes 12
6.1 Trouble Conditions ............................................................................................ 12
6.2 Jamming Signal Detection ................................................................................ 12
6.3 Wireless Zone Low Battery Transmission ......................................................... 12
Troubleshooting 13
Programming Worksheets 14
Index 18
Table of Contents
FCC COMPLIANCE STATEMENT
CAUTION: Changes or modifications not expressly approved by Digital Security Controls Ltd. could
void your authority to use this equipment.
This equipment generates and uses radio frequency energy and if not installed and used properly, in
strict accordance with the manufacturer’s instructions, may cause interference to radio and television
reception. It has been type tested and found to comply with the limits for Class B device in accordance
with the specifications in Subpart “B” of Part 15 of FCC Rules, which are designed to provide
reasonable protection against such interference in any residential installation. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
interference to television or radio reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
•
Re-orient the receiving antenna
•
Relocate the alarm control with respect to the receiver
•
Move the alarm control away from the receiver
•
Connect the alarm control into a different outlet so that alarm control and receiver are on different circuits.
If necessary, the user should consult the dealer or an experienced radio/television technician for addi-
tional suggestions. The user may find the following booklet prepared by the FCC helpful: “How to
Identify and Resolve Radio/Television Interference Problems”. This booklet is available from the U.S.
Government Printing Office, Washington, D.C. 20402, Stock # 004-000-00345-4.