Operating instructions

Safety G3 Series
Proper use
3-2
000011,06,02-2009, jmu
3
3.2 Proper use
The proper use of the machine is essential for its safe operation.
The equipment supplied:
• Is listed and labelled
• Determines the possible uses of the machine
The machine is intended for use as an output device for CAD/CAM data for the
labelling and processing of materials arranged on the table.
The intended use and the limits of the application are dependent on:
• The module and tool system that is used
• The existing material transport system
Any other use or any use going beyond this scope constitutes improper use. The
user bears sole liability for any damage arising as a result of improper use.
The operation of the machine is also seen as correct if:
• All nationally imposed safety regulations are complied with
• The safety instructions in this operating manual are observed
• The operating conditions are adhered to and the prescribed materials are used
3.3 Examples of improper use
Improper use of the machine can:
• Cause injury
• Result in serious damage to the machine
• Lead to loss of warranty
Improper use of the machine includes, among other things:
• Any structural modification to the machine carried out without written agreement
from the manufacturer
• Use of unsuitable modules/tool inserts
• Servicing work performed by untrained or unauthorised personnel
• Installation of spare parts and use of accessories and resources not approved by
the manufacturer
• Deliberate or careless interference with the machine during operation
• Commissioning of the machine
– Without sufficient personal protection equipment
– Without the designated protective and safety measures
– If the operating manual is incomplete or not available in the local language
• Non-adherence to maintenance requirements
• Failure to react to signs of wear and damage