Operating instructions

Glossary G3 Series
14-2
000014,04,12-2008, jmu
14
Modules
Modules serve as the interface between the cutter and the tool.
Emergency stop
Emergency stop switches are safety elements which cause the immediate switching
off of the machine in hazardous situations.
Numerical keys
Keys for making numerical entries on the operating unit.
Parser
Program that can break down any input and convert it into a format that can be used
for further processing.
Popup
Window that is released by the menu.
Shift key
The shift key on the operating unit is used as a switch for short-term switching of the
keyboard to the second assignment level with special functions.
Soft keys
These special keys change their function depending on the situation and ease
operation.
Standby
The cutter is switched on but not initialised. The initialisation is started via the F1 key.
Stop
A stop is triggered by pressing the movement keys in the ONLINE operating status.
In this process all cutter movements are stopped and the OFFLINE operating status
is activated.
Feeding clamps
Feeding clamps fix the processing material during a feed movement on the conveyor
belt.
Tool
Tools are used in modules. There are tools available for processing many common
materials. (E.g. EOT, POT, DRT etc.)