User`s guide

Digital Rapids TouchStream
Page 16
Note that the Dicas projects that have been installed on your
TouchStream unit include 3 output streams in each project. Be sure to
configure the output for all 3 output streams.
 Flash 9 Projects: Each Flash 9 project has both a Push and a Pull
version. (You cannot use Flash 9 push and pull simultaneously.) The
Push version allows you to push to both a Flash Media Server or to a
Media Server that can use an SDP file. When you are selecting a project
be sure to choose the correct broadcast type, Push or Pull.
Push projects send to a Flash Media Server URL default of
rtmp://localhost:1935/live with a Stream name of Default, and assumes
the server does not require username/password authentication. You can
modify any of these settings.
Push projects also can be used to send to an external media server that
can use an SDP file, such as a Darwin Media Server.
The multicast option uses the IP address you provide and also creates
an SDP file at the default location.
The external option sends the stream to the server at the IP address and
port specified, and creates an SDP file on the media server. For media
servers that need authorization you can specify the username and
password.
Pull projects make the stream available over the specified port.
 On2 FLV Projects (Flash 8): These projects push to a Flash Media
Server URL default of rtmp://localhost:1935/live with a Stream name of
Default, and assumes the server does not require username/password
authentication. You can modify any of these settings.
 On2 SWF Projects (Flash 8): These projects can only be used to make
archive files. They cannot be used for Broadcast.
 RTP Projects (included with the TS model): Each RTP project has both a
Push and a Pull version. (You cannot use RTP push and pull
simultaneously.) When you are selecting a project be sure to choose the
correct broadcast type, Push or Pull.
The push projects can multicast the stream or they can send the stream
to an external media server that can use an SDP file, such as a Darwin
Media Server.
The multicast option uses the IP address you provide and also creates
an SDP file at the default location.
The external option sends the stream to the server at the IP address and
port specified, and creates an SDP file on the media server. For media