User`s guide

Digital Rapids TouchStream
Page 13
 TouchStream Mobile: Includes Dicas projects with 3 output streams per
project: H263 at 176x144, MPEG4 at 240x180, H264 at 320x240
 TouchStream TS: Includes projects that output transport streams. The
video in those transport streams will be either H264 or MPEG2. Also
includes projects to output H264 using RTSP/RTP streaming.
 TouchStream with the SD SDI input option includes some additional
projects that include NTSC closed captioning.
If you would like information on modifying projects please see Customizing
TouchStream Projects on page 22.
Input
The TouchStream unit comes with installed input settings that use the most
common settings for live streaming scenarios. When you press the Input Settings
button you will be shown a list of all of the input settings that are installed on the
unit that can be used by your TouchStream model.
When you select an input setting information about that input setting will be
shown in the panel on the left side.
If you would like information about creating your own input settings please see
Customizing TouchStream Projects on page 22.
Note that the selected input setting is not saved with the current project. The
input setting is a global setting that will apply to all projects.
Output
Each TouchStream project includes outputs for Archive file creation and for live
Broadcast streaming. Depending on the codecs included in the project you may
have more than one type of Broadcast output option. By default all of the
available output options will be enabled. Disable the ones you do not plan to use
by pressing the check mark next to the ―Enable‖ to clear the box before you start
encoding.