User`s guide

Digital Rapids TouchStream
Page 12
Note that once the Scheduled Trigger has been armed you can override both the
start and stop manually if desired by pressing the Start or Stop button on the
main screen.
Arm, Disarm, Cancel
When you press the Arm button your selected trigger type will be active, and you
will be returned to the main screen. If you press the Disarm button any previously
selected trigger will be disabled. If you want to exit the trigger screen without
changing any settings, press the Cancel button.
Project
The TouchStream unit comes with installed projects that use the most common
settings for live streaming scenarios. When you press the Project Settings button
you will be shown the projects that include codecs that you are licensed to run on
your TouchStream model.
When you select a project the basic information about that project will be shown
in the panel on the left side. If a project contains more than one encoder then you
will see information for all of the individual encoders, each one in its own section
as you scroll down.
TouchStream projects contain the following information:
 The encoder settings that are used to create the output, including such
things as frame size, bitrate, audio information, frame rate, etc.
 Hardware deinterlacing setting (enabled by default on all projects)
 Output settings for archive and broadcast as appropriate
 For some codecs closed caption settings will be included in the project;
these projects will include ―CC_VBI‖ in the project name
 For some codecs transport stream muxer settings will be included in the
project; these project names start with ―TS_‖
Installed TouchStream Projects
TouchStream has 4 basic models, with 3 input options. The projects that are
available are the ones that can be used by your model and input option.
 TouchStream LE: Includes ASF and WM9 projects
 TouchStream Web: Includes Flash 9 projects and ASF and WM9 projects
 If the Flash 8 option was purchased then On2 projects will be included