Manualshelf

User`s guide

ManualsBrandsdigital rapids ManualsMedia ConverterTouchStream
11121314151617181920
Digital Rapids TouchStream
Page 10
7. If you pressed the Arm button on the Trigger screen you will be returned to the
main interface and you will be able to start streaming based on your trigger.
If you later want to disarm the Trigger, you can press the Setup button to access
the Trigger screen.
If you pressed the Cancel button on the Trigger screen you will be returned to the
Setup screen and you can press the Done button on that screen to then return to
the main screen.
8. On the main screen you will see a Fade In and Fade Out button. If you set a
Graphic Overlay during setup (on the Video Settings) you can use these buttons
to control the graphic overlay.
9. The Video Settings and Audio Settings buttons on the main screen take you to
the same settings screens as the Video Settings and Audio Settings buttons on
the Setup screen. They have been included on the main screen for ease of
access, as you can change the video and audio settings on the fly, while an
encode is taking place, and the settings will be applied immediately to the
encoded video and audio.
10. The Info button on the main screen provides you with information about your
unit. If you are having an issue with your unit and you contact Digital Rapids
Support for assistance they may direct you to use the Email option on this Info
screen. This will email the unit‘s information directly to Digital Rapids Support.
The Info screen also includes a Network Settings button to allow you to configure
the TouchStream for network communications, with both automatic and manual
configuration options.
For details on all settings and operation, please see the following sections.
Setup
To access the Setup screen press the Setup button on the main interface.
Trigger
There are three trigger types available: Manual, GPI and Scheduled.
Note that Trigger settings are global settings that are overwritten when you click
the Done button and return to the main screen. That is, the settings are not saved
with the selected project, they are saved and applied to all projects on the
TouchStream unit.