User`s guide

Digital Rapids TouchStream
Page 8
TouchStream Software Operation
Overview
Getting Started – Using a previous configuration
If the TouchStream unit was previously configured, then the last settings that
were used (e.g., Project, Source, etc.) will be loaded automatically. If you want to
use the same settings as the last time then you can start streaming immediately.
If the TouchStream unit was shut down in an unarmed state, then simply press
the Trigger button, choose your trigger type, press Arm, and you are ready to
start streaming.
If TouchStream
was shut down
in an ―Armed‖
state, then when
it is restarted the
first button will
be green.
If TouchStream
was shut down
in an ―unarmed‖
state, then when
it is restarted the
first button will
be a Trigger
button.