User`s guide

Digital Rapids TouchStream
Page 7
Connecting an External Hard Drive
If you plan to create archive files with your TouchStream unit you will need to
attach an external hard drive for storage. You cannot use the internal drive to
archive your media files.
There are two USB 2.0 ports on the back of the unit and two Firewire ports that
can be used to attach an external drive.
Maximum data transfer speeds: USB 480 Mbps; Firewire 400 Mbps
Connecting a Monitor, Keyboard, Mouse
Normal TouchStream operation only requires the touch screen front panel.
However, should you need to use something other than the TouchStream
software on the box you may need to connect a monitor (DB15 connector),
keyboard and mouse (PS/2 ports or USB) to the system. There are ports on the
back of the unit for these devices.
To close the TouchStream software use the keyboard and click ALT-F4. Do not
change the screen resolution, as the touch screen requires the specific resolution
and it is not easy to reset once it has been changed.