User`s guide

Digital Rapids TouchStream
Page 6
Option 3: SDI HD/SD input
Video: One video channel from HD/SD SDI input (second connector)
Audio: Four stereo channels of embedded SDI audio
Optional with breakout box: Four stereo channels of AES digital audio
inputs
Note for HD inputs: HD inputs may require down-conversion
(performed within TouchStream) to lower resolution or frame rate for
streaming output (dependent on output format).
Connecting to the Network
The TouchStream unit includes a Gigabit Ethernet controller with a standard
8P8C (8 Position 8 Contact) connection, often referred to as an RJ45 connection.
Once you have physically connected the TouchStream unit to the network with a
cable, you may have to configure the network settings using the TouchStream
software. The software default is to automatically obtain an IP address and DNS
if the network supports this capability. If the network does not support this you will
need to ask your network administrator for the appropriate IP settings and you
will have to enter them manually.
To get to the Network settings screen:
 From the main screen press the Info button
 On the Info screen press the Network Settings button
Both ―Automatically obtain and IP Address‖ and ―Automatic DNS‖ will be enabled
by default. Press the check mark box to disable them if you need to manually
enter values provided by your network administrator.