User`s manual

Memory Card Insertion
Please make sure the digital photo frame is powered off when removing the memory
card.
When inserting the memory card, please hold the memory card by its edges and gently insert
it into the appropriate slot (make sure the card’s label FACES AWAY from the LCD display).
Make sure there is at
last one available file on the memory card.
The USB HOST port supports USB flash drives for instance MP3/MP4 player or USB
memory sticks.
Mini USB Port ( for connection to a Computer)
6
Using the USB cable (not supplied),you can connect your digital photo frame to a computer
to transfer files between the two devices.
Connect the mini plug of the USB cable to the mini USB port on the digital photo frame,
and the other end to your computer.
Tu rn the digital photo
frame on and allow the computer a few moments to recognize the
device.
, ny memory cards inserted in the digital photo frame will
appear as external storage devices on the computer.
through normal copy-and-paste or
drag-and-drop methods.
Follow the Safety Remove Instructions to disconnect the USB cable to the computer.
.
The photo frame will also display a message stating that the connection has been
established to a computer.
Once connected to the computer a
Then you can transfer files between the computer and the photo frame's internal memory,
or other memory devices inserted in the photo frame
After disconnecting from the computer the
frame starts the photo slide show automatically
When connecting with a computer, the USB HOST drive is not available.
When copying or transferring the files to the card/internal memroy, in the photo frame , do
not disconnect the USB cable or remove the card.
Make sure your computer is running Windows 2000 or above, e.g. Windows XP
or Vis ta ,
with USB port supported.Mac system is not supported.
fla sh
memory card
fla sh
memo
ry card
SD/MMC/MS/XD cards supported
USB drive